|
|
|
National Stock Number:
5307-00-776-7345
Federal Supply Class:
5307
National Item Identification Number:
007767345
Description:
STUD,PLAIN
Detail:
A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. The maximum diameter of the unthreaded portion must not be greater than the nominal thread diameter plus 0.020 inches (0.508 mm). The unthreaded portion must be without locking or wrenching provisions. It may be thread relieved. See also ROD, THREADED END and ROD, CONTINUOUS THREAD.
|
Manufacturer Information:
| 401880H | 02978 | RENK AMERICA LLC | | 7767345 | 19207 | U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM |
|
Techincal Specification:
| HARDNESS RATING | 28.0 ROCKWELL C MINIMUM AND 34.0 ROCKWELL C MAXIMUM | | OVERALL LENGTH | 1.880 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | SAE ASSN STD SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL COMP 8640 | | NOMINAL THREAD SIZE | 0.562 INCHES STUD THREAD | | NOMINAL THREAD SIZE | 0.562 INCHES NUT THREAD | | SPECIAL FEATURES | STUD END THREAD 0.003 IN. OVERSIZE | | SURFACE TREATMENT | CADMIUM OVERALL | | THREAD CLASS | 3A NUT THREAD | | THREAD DIRECTION | RIGHT-HAND NUT THREAD | | THREAD DIRECTION | RIGHT-HAND STUD THREAD | | THREAD LENGTH | 0.840 INCHES MINIMUM STUD THREAD | | THREAD LENGTH | 0.660 INCHES MINIMUM NUT THREAD | | THREAD PITCH DIAMETERS | +0.5184 TO 0.5204 INCHES STUD THREAD | | THREAD SERIES DESIGNATOR | UNF NUT THREAD | | THREAD SERIES DESIGNATOR | UNS STUD THREAD | | THREAD QUANTITY PER INCH | 12 STUD THREAD | | THREAD QUANTITY PER INCH | 18 NUT THREAD |
|
|