5307-00-774-4731, STUD,PLAIN

National Stock Number:
5307-00-774-4731

Federal Supply Class:
5307

National Item Identification Number:
007744731

Description:
STUD,PLAIN

Detail:
A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. The maximum diameter of the unthreaded portion must not be greater than the nominal thread diameter plus 0.020 inches (0.508 mm). The unthreaded portion must be without locking or wrenching provisions. It may be thread relieved. See also ROD, THREADED END and ROD, CONTINUOUS THREAD.

Manufacturer Information:

401823J	28839	TELEDYNE INDUSTRIES INC TELEDYNE POWER SYSTEMS DIV
401823P012	28839	TELEDYNE INDUSTRIES INC TELEDYNE POWER SYSTEMS DIV

Techincal Specification:

COTTER PIN HOLE DIAMETER	0.065 INCHES MINIMUM AND 0.072 INCHES MAXIMUM FIRST HOLE
DISTANCE FROM COTTER PIN HOLE CENTERLINE TO NUT END	0.110 INCHES NOMINAL FIRST HOLE
HARDNESS RATING	28.0 ROCKWELL C MINIMUM AND 34.0 ROCKWELL C MAXIMUM
OVERALL LENGTH	1.350 INCHES NOMINAL
MATERIAL DOCUMENT AND CLASSIFICATION	SAE ASSN STD SINGLE MATERIAL RESPONSE
MATERIAL	STEEL COMP 8640
NOMINAL THREAD SIZE	0.312 INCHES NUT THREAD
NOMINAL THREAD SIZE	0.312 INCHES STUD THREAD
SPECIAL FEATURES	STUD END THREAD 0.012 IN. OVERSIZE
SURFACE TREATMENT	CADMIUM OVERALL
THREAD DIRECTION	RIGHT-HAND NUT THREAD
THREAD DIRECTION	RIGHT-HAND STUD THREAD
THREAD LENGTH	0.500 INCHES MINIMUM NUT THREAD
THREAD LENGTH	0.620 INCHES MINIMUM STUD THREAD
THREAD PITCH DIAMETERS	+0.2944 TO 0.2959 INCHES STUD THREAD
THREAD SERIES DESIGNATOR	UNC STUD THREAD
THREAD SERIES DESIGNATOR	UNF NUT THREAD
THREAD QUANTITY PER INCH	18 STUD THREAD
THREAD QUANTITY PER INCH	24 NUT THREAD

Click here to Register for Free 30-day Trial