|
|
|
National Stock Number:
5307-00-772-2612
Federal Supply Class:
5307
National Item Identification Number:
007722612
Description:
STUD,PLAIN
Detail:
A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. The maximum diameter of the unthreaded portion must not be greater than the nominal thread diameter plus 0.020 inches (0.508 mm). The unthreaded portion must be without locking or wrenching provisions. It may be thread relieved. See also ROD, THREADED END and ROD, CONTINUOUS THREAD.
|
Manufacturer Information:
| 292C921P16 | 24446 | GENERAL ELECTRIC COMPANY | | 292C921P16 | 92215 | HOWMET GLOBAL FASTENING SYSTEMS INC | | 292C921P16 | 96972 | GENERAL ELECTRIC CO FLIGHT PROPULSION DIVISION OF ELECTRONIC ATOMIC AND DEFENSE SYSTEMS GROUP | | 292C921P16 | 99207 | GENERAL ELECTRIC COMPANY |
|
Techincal Specification:
| OVERALL LENGTH | 1.140 INCHES MINIMUM AND 1.160 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5637 ASSN STD SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL COMP 302 | | NOMINAL THREAD SIZE | 0.250 INCHES NUT THREAD | | NOMINAL THREAD SIZE | 0.250 INCHES STUD THREAD | | SURFACE FINISH | 63.0 MICROINCHES NUT THD | | SURFACE FINISH | 63.0 MICROINCHES STUD THD | | THREAD CLASS | 3A NUT THREAD | | THREAD CLASS | 3A STUD THREAD | | THREAD DIRECTION | RIGHT-HAND NUT THREAD | | THREAD DIRECTION | RIGHT-HAND STUD THREAD | | THREAD LENGTH | 0.420 INCHES MINIMUM AND 0.470 INCHES MAXIMUM STUD THREAD | | THREAD LENGTH | 0.580 INCHES NOMINAL NUT THREAD | | THREAD SERIES DESIGNATOR | UNC STUD THREAD | | THREAD SERIES DESIGNATOR | UNF NUT THREAD | | THREAD QUANTITY PER INCH | 20 STUD THREAD | | THREAD QUANTITY PER INCH | 28 NUT THREAD |
|