|
|
|
National Stock Number:
5307-00-759-2754
Federal Supply Class:
5307
National Item Identification Number:
007592754
Description:
STUD,PLAIN
Detail:
A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. The maximum diameter of the unthreaded portion must not be greater than the nominal thread diameter plus 0.020 inches (0.508 mm). The unthreaded portion must be without locking or wrenching provisions. It may be thread relieved. See also ROD, THREADED END and ROD, CONTINUOUS THREAD.
|
Manufacturer Information:
| 107948 | 12603 | CLARK EQUIPMENT CO | | 107948 | 77237 | DANA OFF HIGHWAY PRODUCTS, LLC | | 118831 | 77237 | DANA OFF HIGHWAY PRODUCTS, LLC | | 1188311 | 77237 | DANA OFF HIGHWAY PRODUCTS, LLC |
|
Techincal Specification:
| HARDNESS RATING | 32.0 ROCKWELL C MINIMUM AND 38.0 ROCKWELL C MAXIMUM | | OVERALL LENGTH | 4.250 INCHES NOMINAL | | MATERIAL | STEEL | | NOMINAL THREAD SIZE | 0.875 INCHES NUT THREAD | | NOMINAL THREAD SIZE | 0.875 INCHES STUD THREAD | | THREAD CLASS | 3A NUT THREAD | | THREAD DIRECTION | RIGHT-HAND NUT THREAD | | THREAD DIRECTION | RIGHT-HAND STUD THREAD | | THREAD LENGTH | 1.250 INCHES MINIMUM NUT THREAD | | THREAD LENGTH | 1.375 INCHES MINIMUM STUD THREAD | | THREAD QUANTITY PER INCH | 14 NUT THREAD | | THREAD PITCH DIAMETERS | +0.8040 TO 0.8083 INCHES STUD THREAD | | THREAD QUANTITY PER INCH | 9 STUD THREAD | | THREAD SERIES DESIGNATOR | UNF NUT THREAD | | THREAD SERIES DESIGNATOR | UNS STUD THREAD |
|
|