|
|
|
National Stock Number:
5307-00-709-7073
Federal Supply Class:
5307
National Item Identification Number:
007097073
Description:
STUD,PLAIN
Detail:
A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. The maximum diameter of the unthreaded portion must not be greater than the nominal thread diameter plus 0.020 inches (0.508 mm). The unthreaded portion must be without locking or wrenching provisions. It may be thread relieved. See also ROD, THREADED END and ROD, CONTINUOUS THREAD.
|
Manufacturer Information:
| 200248S | 02978 | RENK AMERICA LLC | | 200248S7 | 02978 | RENK AMERICA LLC | | 2028S7 | 0AHP5 | CURTISS-WRIGHT CONTROLS, INC. |
|
Techincal Specification:
| COTTER PIN HOLE DIAMETER | 0.065 INCHES MINIMUM AND 0.072 INCHES MAXIMUM FIRST HOLE | | DISTANCE FROM COTTER PIN HOLE CENTERLINE TO NUT END | 0.109 INCHES MINIMUM FIRST HOLE | | HARDNESS RATING | 26.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM | | OVERALL LENGTH | 1.160 INCHES MINIMUM AND 1.200 INCHES MAXIMUM | | NOMINAL THREAD SIZE | 0.250 INCHES NUT THREAD | | NOMINAL THREAD SIZE | 0.250 INCHES STUD THREAD | | THREAD LENGTH | 0.563 INCHES MINIMUM NUT THREAD | | THREAD LENGTH | 0.480 INCHES MINIMUM STUD THREAD | | THREAD QUANTITY PER INCH | 20 NUT THREAD | | THREAD QUANTITY PER INCH | 28 STUD THREAD | | THREAD PITCH DIAMETERS | +0.2246 TO 0.2263 INCHES STUD THREAD | | THREAD PITCH DIAMETERS | +0.2301 TO 0.2314 INCHES NUT THREAD | | THREAD SERIES DESIGNATOR | UNC NUT THREAD | | THREAD SERIES DESIGNATOR | UNF STUD THREAD |
|
|