|
|
|
National Stock Number:
5307-00-685-7094
Federal Supply Class:
5307
National Item Identification Number:
006857094
Description:
STUD,PLAIN
Detail:
A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. The maximum diameter of the unthreaded portion must not be greater than the nominal thread diameter plus 0.020 inches (0.508 mm). The unthreaded portion must be without locking or wrenching provisions. It may be thread relieved. See also ROD, THREADED END and ROD, CONTINUOUS THREAD.
|
Manufacturer Information:
| 99-1368-01 | 72840 | BLACKHAWK R T MACHINE PRODUCTS INC | | 99-1368-01 | 99167 | HAMILTON SUNDSTRAND CORPORATION |
|
Techincal Specification:
| COTTER PIN HOLE DIAMETER | 0.106 INCHES NOMINAL FIRST HOLE | | DISTANCE FROM COTTER PIN HOLE CENTERLINE TO NUT END | 0.125 INCHES NOMINAL FIRST HOLE | | HARDNESS RATING | 26.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM | | OVERALL LENGTH | 1.438 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 6320 ASSN STD SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL COMP 8735 | | NOMINAL THREAD SIZE | 0.375 INCHES NUT THREAD | | NOMINAL THREAD SIZE | 0.375 INCHES STUD THREAD | | SURFACE TREATMENT | CADMIUM OVERALL | | THREAD CLASS | 3A NUT THREAD | | THREAD DIRECTION | RIGHT-HAND NUT THREAD | | THREAD DIRECTION | RIGHT-HAND STUD THREAD | | THREAD LENGTH | 0.580 INCHES MINIMUM STUD THREAD | | THREAD LENGTH | 0.710 INCHES MINIMUM NUT THREAD | | THREAD PITCH DIAMETERS | +0.3405 TO 0.3429 INCHES STUD THREAD | | THREAD SERIES DESIGNATOR | UNF NUT THREAD | | THREAD SERIES DESIGNATOR | UNS STUD THREAD | | THREAD QUANTITY PER INCH | 16 STUD THREAD | | THREAD QUANTITY PER INCH | 24 NUT THREAD |
|
|