|
|
|
National Stock Number:
5307-00-685-1576
Federal Supply Class:
5307
National Item Identification Number:
006851576
Description:
STUD,PLAIN
Detail:
A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. The maximum diameter of the unthreaded portion must not be greater than the nominal thread diameter plus 0.020 inches (0.508 mm). The unthreaded portion must be without locking or wrenching provisions. It may be thread relieved. See also ROD, THREADED END and ROD, CONTINUOUS THREAD.
|
Manufacturer Information:
| AP111440 | 23233 | JAY-EM AEROSPACE CORPORATION | | AP111440 | 73808 | CONTINENTAL TIRE THE AMERICAS, LLC |
|
Techincal Specification:
| HARDNESS RATING | 27.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM | | OVERALL LENGTH | 1.625 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-6049 ASSN STD SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL COMP 8740 | | NOMINAL THREAD SIZE | 0.312 INCHES NUT THREAD | | NOMINAL THREAD SIZE | 0.312 INCHES STUD THREAD | | PART NAME ASSIGNED BY CONTROLLING AGENCY | NAVY SPECIAL PROJECT | | SURFACE TREATMENT | CADMIUM OVERALL | | THREAD CLASS | 3A NUT THREAD | | THREAD DIRECTION | RIGHT-HAND NUT THREAD | | THREAD DIRECTION | RIGHT-HAND STUD THREAD | | THREAD LENGTH | 0.531 INCHES MAXIMUM NUT THREAD | | THREAD LENGTH | 0.375 INCHES MAXIMUM STUD THREAD | | THREAD PITCH DIAMETERS | +0.2871 TO 0.2884 INCHES STUD THREAD | | THREAD SERIES DESIGNATOR | UNF NUT THREAD | | THREAD SERIES DESIGNATOR | UNS STUD THREAD | | THREAD QUANTITY PER INCH | 24 NUT THREAD | | THREAD QUANTITY PER INCH | 24 STUD THREAD |
|
|