|
|
|
National Stock Number:
5307-00-655-5816
Federal Supply Class:
5307
National Item Identification Number:
006555816
Description:
STUD,PLAIN
Detail:
A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. The maximum diameter of the unthreaded portion must not be greater than the nominal thread diameter plus 0.020 inches (0.508 mm). The unthreaded portion must be without locking or wrenching provisions. It may be thread relieved. See also ROD, THREADED END and ROD, CONTINUOUS THREAD.
|
Manufacturer Information:
| PS113-36-3 | 99167 | HAMILTON SUNDSTRAND CORPORATION |
|
Techincal Specification:
| DISTANCE FROM COTTER PIN HOLE CENTERLINE TO NUT END | 0.125 INCHES NOMINAL FIRST HOLE | | COTTER PIN HOLE DIAMETER | 0.106 INCHES NOMINAL FIRST HOLE | | OVERALL LENGTH | 2.250 INCHES NOMINAL | | MATERIAL | STEEL | | NOMINAL THREAD SIZE | 0.375 INCHES STUD THREAD | | NOMINAL THREAD SIZE | 0.375 INCHES NUT THREAD | | SURFACE TREATMENT | CADMIUM OVERALL | | THREAD CLASS | 3A NUT THREAD | | THREAD DIRECTION | RIGHT-HAND NUT THREAD | | THREAD DIRECTION | RIGHT-HAND STUD THREAD | | THREAD LENGTH | 0.625 INCHES MAXIMUM NUT THREAD | | THREAD LENGTH | 0.625 INCHES MAXIMUM STUD THREAD | | THREAD QUANTITY PER INCH | 16 STUD THREAD | | THREAD QUANTITY PER INCH | 24 NUT THREAD | | THREAD PITCH DIAMETERS | +0.3405 TO 0.3429 INCHES STUD THREAD | | THREAD SERIES DESIGNATOR | UNF NUT THREAD | | THREAD SERIES DESIGNATOR | UNS STUD THREAD |
|
|