|
|
|
National Stock Number:
5307-00-639-8354
Federal Supply Class:
5307
National Item Identification Number:
006398354
Description:
STUD,PLAIN
Detail:
A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. The maximum diameter of the unthreaded portion must not be greater than the nominal thread diameter plus 0.020 inches (0.508 mm). The unthreaded portion must be without locking or wrenching provisions. It may be thread relieved. See also ROD, THREADED END and ROD, CONTINUOUS THREAD.
|
Manufacturer Information:
| 2049S60 | 0AHP5 | CURTISS-WRIGHT CONTROLS, INC. |
|
Techincal Specification:
| HARDNESS RATING | 26.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM | | OVERALL LENGTH | 1.730 INCHES MINIMUM AND 1.770 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS6320 ASSN STD SINGLE MATERIAL RESPONSE OR AMS6382 ASSN STD 2ND MATERIAL RESPONSE | | MATERIAL | STEEL COMP 8735 OR STEEL COMP 4140 | | NOMINAL THREAD SIZE | 0.375 INCHES STUD THREAD | | NOMINAL THREAD SIZE | 0.375 INCHES NUT THREAD | | SURFACE TREATMENT | CADMIUM OVERALL | | THREAD CLASS | 3A NUT THREAD | | THREAD DIRECTION | RIGHT-HAND NUT THREAD | | THREAD DIRECTION | RIGHT-HAND STUD THREAD | | THREAD LENGTH | 0.700 INCHES MINIMUM STUD THREAD | | THREAD LENGTH | 0.820 INCHES MINIMUM NUT THREAD | | THREAD QUANTITY PER INCH | 16 STUD THREAD | | THREAD QUANTITY PER INCH | 24 NUT THREAD | | THREAD PITCH DIAMETERS | +0.3470 TO 0.3480 INCHES STUD THREAD | | THREAD PITCH DIAMETERS | +0.3455 TO 0.3474 INCHES NUT THREAD | | THREAD SERIES DESIGNATOR | UNC STUD THREAD | | THREAD SERIES DESIGNATOR | UNF NUT THREAD |
|
|