|
|
|
National Stock Number:
5307-00-639-4738
Federal Supply Class:
5307
National Item Identification Number:
006394738
Description:
STUD,PLAIN
Detail:
A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. The maximum diameter of the unthreaded portion must not be greater than the nominal thread diameter plus 0.020 inches (0.508 mm). The unthreaded portion must be without locking or wrenching provisions. It may be thread relieved. See also ROD, THREADED END and ROD, CONTINUOUS THREAD.
|
Manufacturer Information:
| 100395P005 | 81580 | MCCULLOCH CORP |
|
Techincal Specification:
| HARDNESS RATING | 30.0 ROCKWELL C MINIMUM AND 34.0 ROCKWELL C MAXIMUM | | OVERALL LENGTH | 4.410 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-6758,COND F MIL SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL COMP 4130 | | NOMINAL THREAD SIZE | 0.250 INCHES NUT THREAD | | NOMINAL THREAD SIZE | 0.250 INCHES STUD THREAD | | SURFACE TREATMENT | CADMIUM OVERALL | | THREAD DIRECTION | RIGHT-HAND NUT THREAD | | THREAD DIRECTION | RIGHT-HAND STUD THREAD | | THREAD LENGTH | 0.621 INCHES MINIMUM NUT THREAD | | THREAD LENGTH | 0.680 INCHES MINIMUM STUD THREAD | | THREAD QUANTITY PER INCH | 20 STUD THREAD | | THREAD QUANTITY PER INCH | 28 NUT THREAD | | THREAD PITCH DIAMETERS | +0.2237 TO 0.2268 INCHES NUT THREAD | | THREAD PITCH DIAMETERS | +0.2245 TO 0.2265 INCHES STUD THREAD | | THREAD SERIES DESIGNATOR | UNS NUT THREAD | | THREAD SERIES DESIGNATOR | UNS STUD THREAD |
|
|