|
|
|
National Stock Number:
5307-00-637-7254
Federal Supply Class:
5307
National Item Identification Number:
006377254
Description:
STUD,PLAIN
Detail:
A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. The maximum diameter of the unthreaded portion must not be greater than the nominal thread diameter plus 0.020 inches (0.508 mm). The unthreaded portion must be without locking or wrenching provisions. It may be thread relieved. See also ROD, THREADED END and ROD, CONTINUOUS THREAD.
|
Manufacturer Information:
| A74540 | 78047 | CAPITOL ENGINE CO INC DBA SALMINI WORLDWIDE |
|
Techincal Specification:
| DISTANCE FROM COTTER PIN HOLE CENTERLINE TO NUT END | 0.109 INCHES NOMINAL FIRST HOLE | | COTTER PIN HOLE DIAMETER | 0.067 INCHES NOMINAL FIRST HOLE | | HARDNESS RATING | 23.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM | | OVERALL LENGTH | 1.125 INCHES NOMINAL | | MATERIAL | STEEL | | NOMINAL THREAD SIZE | 0.250 INCHES NUT THREAD | | NOMINAL THREAD SIZE | 0.250 INCHES STUD THREAD | | SPECIAL FEATURES | 70 PER CENT LOK-THRED STUD END | | THREAD CLASS | 3A NUT THREAD | | THREAD DIRECTION | RIGHT-HAND NUT THREAD | | THREAD DIRECTION | RIGHT-HAND STUD THREAD | | THREAD LENGTH | 0.438 INCHES MINIMUM NUT THREAD | | THREAD LENGTH | 0.500 INCHES MINIMUM STUD THREAD | | THREAD QUANTITY PER INCH | 20 STUD THREAD | | THREAD QUANTITY PER INCH | 28 NUT THREAD | | THREAD SERIES DESIGNATOR | UNC STUD THREAD | | THREAD SERIES DESIGNATOR | UNF NUT THREAD |
|
|