|
|
|
National Stock Number:
5307-00-637-5298
Federal Supply Class:
5307
National Item Identification Number:
006375298
Description:
STUD,PLAIN
Detail:
A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. The maximum diameter of the unthreaded portion must not be greater than the nominal thread diameter plus 0.020 inches (0.508 mm). The unthreaded portion must be without locking or wrenching provisions. It may be thread relieved. See also ROD, THREADED END and ROD, CONTINUOUS THREAD.
|
Manufacturer Information:
| 5175305 | 24617 | GENERAL MOTORS CORP | | 5175305 | 72582 | ROLLS-ROYCE SOLUTIONS AMERICA INC | | 5175305 | 7X677 | GENERAL MOTORS LLC | | PC5175305 | C7432 | POWER COMPONENTS (DEUTSCHLAND) GMBH |
|
Techincal Specification:
| DISTANCE FROM COTTER PIN HOLE CENTERLINE TO NUT END | 0.250 INCHES NOMINAL FIRST HOLE | | COTTER PIN HOLE DIAMETER | 0.141 INCHES NOMINAL FIRST HOLE | | OVERALL LENGTH | 6.312 INCHES NOMINAL | | MATERIAL | STEEL | | NOMINAL THREAD SIZE | 0.625 INCHES NUT THREAD | | NOMINAL THREAD SIZE | 0.625 INCHES STUD THREAD | | SURFACE FINISH | 32.0 MICROINCHES NUT THD | | SURFACE FINISH | 32.0 MICROINCHES STUD THD | | SURFACE FINISH | 63.0 MICROINCHES SHANK | | THREAD CLASS | 2A NUT THREAD | | THREAD DIRECTION | RIGHT-HAND NUT THREAD | | THREAD DIRECTION | RIGHT-HAND STUD THREAD | | THREAD LENGTH | 1.125 INCHES MINIMUM NUT THREAD | | THREAD LENGTH | 1.375 INCHES MAXIMUM STUD THREAD | | THREAD QUANTITY PER INCH | 11 STUD THREAD | | THREAD QUANTITY PER INCH | 18 NUT THREAD | | THREAD PITCH DIAMETERS | +0.5670 TO 0.5700 INCHES STUD THREAD | | THREAD SERIES DESIGNATOR | UNF NUT THREAD | | THREAD SERIES DESIGNATOR | UNS STUD THREAD |
|