|
|
|
National Stock Number:
5307-00-528-1571
Federal Supply Class:
5307
National Item Identification Number:
005281571
Description:
STUD,PLAIN
Detail:
A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. The maximum diameter of the unthreaded portion must not be greater than the nominal thread diameter plus 0.020 inches (0.508 mm). The unthreaded portion must be without locking or wrenching provisions. It may be thread relieved. See also ROD, THREADED END and ROD, CONTINUOUS THREAD.
|
Manufacturer Information:
| 2091451 | 24617 | GENERAL MOTORS CORP | | 2091451 | 7X677 | GENERAL MOTORS LLC |
|
Techincal Specification:
| OVERALL LENGTH | 1.718 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | SAE 1112 ASSN STD SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL | | NOMINAL THREAD SIZE | 0.375 INCHES NUT THREAD | | NOMINAL THREAD SIZE | 0.375 INCHES STUD THREAD | | THREAD DIRECTION | RIGHT-HAND NUT THREAD | | THREAD DIRECTION | RIGHT-HAND STUD THREAD | | THREAD LENGTH | 0.562 INCHES MINIMUM STUD THREAD | | THREAD LENGTH | 0.625 INCHES MINIMUM NUT THREAD | | THREAD QUANTITY PER INCH | 16 NUT THREAD | | THREAD QUANTITY PER INCH | 16 STUD THREAD | | THREAD PITCH DIAMETERS | +0.3320 TO 0.3350 INCHES STUD THREAD | | THREAD PITCH DIAMETERS | +0.3360 TO 0.3380 INCHES NUT THREAD | | THREAD SERIES DESIGNATOR | UNC NUT THREAD | | THREAD SERIES DESIGNATOR | UNC STUD THREAD |
|