|
|
|
National Stock Number:
5307-00-527-4476
Federal Supply Class:
5307
National Item Identification Number:
005274476
Description:
STUD,PLAIN
Detail:
A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. The maximum diameter of the unthreaded portion must not be greater than the nominal thread diameter plus 0.020 inches (0.508 mm). The unthreaded portion must be without locking or wrenching provisions. It may be thread relieved. See also ROD, THREADED END and ROD, CONTINUOUS THREAD.
|
Manufacturer Information:
| 214-040-472-9 | 97499 | BELL TEXTRON INC |
|
Techincal Specification:
| HARDNESS RATING | 27.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM | | OVERALL LENGTH | 2.196 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5000,C4 MIL SPEC ALL MATERIAL RESPONSES | | MATERIAL | STEEL COMP 4340 OR STEEL COMP E4340 | | NOMINAL THREAD SIZE | 0.375 INCHES NUT THREAD | | NOMINAL THREAD SIZE | 0.375 INCHES STUD THREAD | | SURFACE FINISH | 32.0 MICROINCHES NUT THD | | SURFACE FINISH | 32.0 MICROINCHES STUD THD | | SURFACE FINISH | 63.0 MICROINCHES SHANK | | THREAD CLASS | 3A NUT THREAD | | THREAD DIRECTION | RIGHT-HAND NUT THREAD | | THREAD DIRECTION | RIGHT-HAND STUD THREAD | | THREAD LENGTH | 0.688 INCHES NOMINAL NUT THREAD | | THREAD LENGTH | 0.938 INCHES NOMINAL STUD THREAD | | THREAD QUANTITY PER INCH | 16 STUD THREAD | | THREAD QUANTITY PER INCH | 24 NUT THREAD | | THREAD PITCH DIAMETERS | +0.3482 TO 0.3497 INCHES STUD THREAD | | THREAD SERIES DESIGNATOR | UNF NUT THREAD | | THREAD SERIES DESIGNATOR | UNS STUD THREAD |
|
|