|
|
|
National Stock Number:
5307-00-169-3541
Federal Supply Class:
5307
National Item Identification Number:
001693541
Description:
STUD,PLAIN
Detail:
A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. The maximum diameter of the unthreaded portion must not be greater than the nominal thread diameter plus 0.020 inches (0.508 mm). The unthreaded portion must be without locking or wrenching provisions. It may be thread relieved. See also ROD, THREADED END and ROD, CONTINUOUS THREAD.
|
Manufacturer Information:
| 2029S18 | 0AHP5 | CURTISS-WRIGHT CONTROLS, INC. |
|
Techincal Specification:
| HARDNESS RATING | 26.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM | | OVERALL LENGTH | 1.980 INCHES MINIMUM AND 2.020 INCHES MAXIMUM | | MATERIAL | STEEL COMP 8735 OR STEEL COMP 8740 | | NOMINAL THREAD SIZE | 0.312 INCHES NUT THREAD | | NOMINAL THREAD SIZE | 0.312 INCHES STUD THREAD | | SPECIAL FEATURES | STUD END THREAD 0.007 IN. OVERSIZE | | SURFACE TREATMENT | CADMIUM OVERALL | | THREAD CLASS | 3A NUT THREAD | | THREAD DIRECTION | RIGHT-HAND NUT THREAD | | THREAD DIRECTION | RIGHT-HAND STUD THREAD | | THREAD LENGTH | 0.560 INCHES MINIMUM AND 0.740 INCHES MAXIMUM NUT THREAD | | THREAD LENGTH | 0.680 INCHES MINIMUM AND 0.900 INCHES MAXIMUM STUD THREAD | | THREAD PITCH DIAMETERS | +0.2894 TO 0.2904 INCHES STUD THREAD | | THREAD SERIES DESIGNATOR | UNC STUD THREAD | | THREAD SERIES DESIGNATOR | UNF NUT THREAD | | THREAD QUANTITY PER INCH | 18 STUD THREAD | | THREAD QUANTITY PER INCH | 24 NUT THREAD |
|
|