|
|
|
National Stock Number:
5307-00-166-3214
Federal Supply Class:
5307
National Item Identification Number:
001663214
Description:
STUD,PLAIN
Detail:
A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. The maximum diameter of the unthreaded portion must not be greater than the nominal thread diameter plus 0.020 inches (0.508 mm). The unthreaded portion must be without locking or wrenching provisions. It may be thread relieved. See also ROD, THREADED END and ROD, CONTINUOUS THREAD.
|
Manufacturer Information:
| 17746P003 | 70188 | FRANKLIN ENGINE CO INC | | 17746P3 | 70188 | FRANKLIN ENGINE CO INC |
|
Techincal Specification:
| HARDNESS RATING | 25.0 ROCKWELL C MINIMUM AND 33.0 ROCKWELL C MAXIMUM | | OVERALL LENGTH | 1.484 INCHES MINIMUM AND 1.531 INCHES MAXIMUM | | MATERIAL | STEEL COMP 8740 OR STEEL COMP 8735 | | NOMINAL THREAD SIZE | 0.375 INCHES NUT THREAD | | NOMINAL THREAD SIZE | 0.375 INCHES STUD THREAD | | SPECIAL FEATURES | STUD END THREAD 0.003 IN. OVERSIZE | | SURFACE TREATMENT | CADMIUM OVERALL | | THREAD CLASS | 3A NUT THREAD | | THREAD DIRECTION | RIGHT-HAND NUT THREAD | | THREAD DIRECTION | RIGHT-HAND STUD THREAD | | THREAD LENGTH | 0.625 INCHES MINIMUM NUT THREAD | | THREAD LENGTH | 0.625 INCHES MINIMUM STUD THREAD | | THREAD PITCH DIAMETERS | +0.3444 TO 0.3459 INCHES STUD THREAD | | THREAD SERIES DESIGNATOR | UNF NUT THREAD | | THREAD SERIES DESIGNATOR | UNS STUD THREAD | | THREAD QUANTITY PER INCH | 16 STUD THREAD | | THREAD QUANTITY PER INCH | 24 NUT THREAD |
|
|