|
|
|
National Stock Number:
5307-00-151-9039
Federal Supply Class:
5307
National Item Identification Number:
001519039
Description:
STUD,STEPPED
Detail:
A HEADLESS FASTENER NOT EXCEEDING 12 INCHES (304.8 MM) IN LENGTH, THREADED EXTERNALLY ON BOTH ENDS ON WHICH THE NOMINAL DIAMETER OF ONE THREADED SECTION IS GREATER THAN THE OTHER. THE ENTIRE UNTHREADED PORTION MUST BE OF A SINGLE DIAMETER EQUAL TO OR SMALLER THAN THE MAXIMUM MAJOR DIAMETER OF THE LARGER THREADED END. INCLUDES RADIAL GROOVES OR THREAD RELIEFS. EXCLUDES ITEMS WITH TAPERED THREADS.
|
Manufacturer Information:
| 697095-1 | 99167 | HAMILTON SUNDSTRAND CORPORATION |
|
Techincal Specification:
| HARDNESS RATING | 36.0 ROCKWELL C MINIMUM AND 43.0 ROCKWELL C MAXIMUM | | OVERALL LENGTH | 3.365 INCHES MINIMUM AND 3.385 INCHES MAXIMUM | | NOMINAL THREAD SIZE | 0.250 INCHES NUT THREAD | | NOMINAL THREAD SIZE | 0.312 INCHES STUD THREAD | | PART NAME ASSIGNED BY CONTROLLING AGENCY | NAVY SPECIAL PROJECT | | SHANK DIAMETER | 0.221 INCHES MINIMUM AND 0.231 INCHES MAXIMUM | | STYLE DESIGNATOR | STEPPED | | SURFACE FINISH | 63.0 MICROINCHES SHANK | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | CADMIUM AND CHROMATE OVERALL | | TEST DATA DOCUMENT | 99167-PN16.04 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). | | THREAD CLASS | 3A NUT THREAD | | THREAD DIRECTION | RIGHT-HAND NUT THREAD | | THREAD DIRECTION | RIGHT-HAND STUD THREAD | | THREAD LENGTH | 0.615 INCHES MINIMUM AND 0.635 INCHES MAXIMUM STUD THREAD | | THREAD LENGTH | 0.438 INCHES MINIMUM NUT THREAD | | THREAD QUANTITY PER INCH | 18 STUD THREAD | | THREAD QUANTITY PER INCH | 28 NUT THREAD | | THREAD PITCH DIAMETERS | +0.2810 TO 0.2825 INCHES STUD THREAD | | THREAD SERIES DESIGNATOR | UNF NUT THREAD | | THREAD SERIES DESIGNATOR | UNS STUD THREAD |
|
|