|
|
|
National Stock Number:
5307-00-149-9610
Federal Supply Class:
5307
National Item Identification Number:
001499610
Description:
STUD,PLAIN
Detail:
A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. The maximum diameter of the unthreaded portion must not be greater than the nominal thread diameter plus 0.020 inches (0.508 mm). The unthreaded portion must be without locking or wrenching provisions. It may be thread relieved. See also ROD, THREADED END and ROD, CONTINUOUS THREAD.
|
Manufacturer Information:
| 621P004 | 77445 | RTX CORPORATION | | 621P4 | 77445 | RTX CORPORATION |
|
Techincal Specification:
| DISTANCE FROM COTTER PIN HOLE CENTERLINE TO NUT END | 1.062 INCHES NOMINAL FIRST HOLE | | COTTER PIN HOLE DIAMETER | 0.094 INCHES NOMINAL FIRST HOLE | | OVERALL LENGTH | 1.156 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 6320 ASSN STD SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL COMP 8735 | | NOMINAL THREAD SIZE | 0.312 INCHES NUT THREAD | | NOMINAL THREAD SIZE | 0.312 INCHES STUD THREAD | | SURFACE TREATMENT | CADMIUM OVERALL | | THREAD CLASS | 3A NUT THREAD | | THREAD DIRECTION | RIGHT-HAND NUT THREAD | | THREAD DIRECTION | RIGHT-HAND STUD THREAD | | THREAD LENGTH | 0.438 INCHES MINIMUM NUT THREAD | | THREAD LENGTH | 0.625 INCHES MINIMUM STUD THREAD | | THREAD QUANTITY PER INCH | 18 STUD THREAD | | THREAD QUANTITY PER INCH | 24 NUT THREAD | | THREAD SERIES DESIGNATOR | UNC STUD THREAD | | THREAD SERIES DESIGNATOR | UNF NUT THREAD |
|
|