| DISTANCE FROM COTTER PIN HOLE CENTERLINE TO NUT END | 0.140 INCHES NOMINAL FIRST HOLE |
| COTTER PIN HOLE DIAMETER | 0.096 INCHES MINIMUM AND 0.103 INCHES MAXIMUM FIRST HOLE |
| HARDNESS RATING | 26.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM |
| OVERALL LENGTH | 1.660 INCHES MINIMUM AND 1.700 INCHES MAXIMUM |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS 6320 ASSN STD SINGLE MATERIAL RESPONSE |
| MATERIAL | STEEL COMP 8735 |
| NOMINAL THREAD SIZE | 0.375 INCHES NUT THREAD |
| NOMINAL THREAD SIZE | 0.375 INCHES STUD THREAD |
| SPECIAL FEATURES | THD ON STUD END 0.003 IN.OVERSIZE |
| SURFACE TREATMENT | CADMIUM OVERALL |
| THREAD CLASS | 3A NUT THREAD |
| THREAD CLASS | 3A STUD THREAD |
| THREAD DIRECTION | RIGHT-HAND NUT THREAD |
| THREAD DIRECTION | RIGHT-HAND STUD THREAD |
| THREAD LENGTH | 0.700 INCHES MINIMUM STUD THREAD |
| THREAD LENGTH | 0.800 INCHES MINIMUM NUT THREAD |
| THREAD QUANTITY PER INCH | 16 STUD THREAD |
| THREAD QUANTITY PER INCH | 24 NUT THREAD |
| THREAD SERIES DESIGNATOR | UNC STUD THREAD |
| THREAD SERIES DESIGNATOR | UNF NUT THREAD |