|
|
|
National Stock Number:
5307-00-145-4853
Federal Supply Class:
5307
National Item Identification Number:
001454853
Description:
STUD,PLAIN
Detail:
A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. The maximum diameter of the unthreaded portion must not be greater than the nominal thread diameter plus 0.020 inches (0.508 mm). The unthreaded portion must be without locking or wrenching provisions. It may be thread relieved. See also ROD, THREADED END and ROD, CONTINUOUS THREAD.
|
Manufacturer Information:
| 5206-8 | 00198 | PRATT & WHITNEY CANADA CORP | | 5206-8 | 77445 | RTX CORPORATION | | 5206P008 | 00198 | PRATT & WHITNEY CANADA CORP | | 5206P008 | 77445 | RTX CORPORATION | | 5206P8 | 77445 | RTX CORPORATION |
|
Techincal Specification:
| DISTANCE FROM COTTER PIN HOLE CENTERLINE TO NUT END | 0.094 INCHES NOMINAL FIRST HOLE | | COTTER PIN HOLE DIAMETER | 0.078 INCHES NOMINAL FIRST HOLE | | OVERALL LENGTH | 2.578 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 6320 ASSN STD SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL COMP 8735 | | NOMINAL THREAD SIZE | 0.250 INCHES NUT THREAD | | NOMINAL THREAD SIZE | 0.250 INCHES STUD THREAD | | SURFACE TREATMENT | CADMIUM OVERALL | | THREAD CLASS | 3A NUT THREAD | | THREAD DIRECTION | RIGHT-HAND NUT THREAD | | THREAD DIRECTION | RIGHT-HAND STUD THREAD | | THREAD LENGTH | 0.375 INCHES MINIMUM NUT THREAD | | THREAD LENGTH | 0.500 INCHES MINIMUM STUD THREAD | | THREAD PITCH DIAMETERS | +0.2290 TO 0.2314 INCHES STUD THREAD | | THREAD QUANTITY PER INCH | 20 STUD THREAD | | THREAD QUANTITY PER INCH | 28 NUT THREAD | | THREAD SERIES DESIGNATOR | UNF NUT THREAD | | THREAD SERIES DESIGNATOR | UNS STUD THREAD |
|