|
|
|
National Stock Number:
5307-00-145-3401
Federal Supply Class:
5307
National Item Identification Number:
001453401
Description:
STUD,PLAIN
Detail:
A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. The maximum diameter of the unthreaded portion must not be greater than the nominal thread diameter plus 0.020 inches (0.508 mm). The unthreaded portion must be without locking or wrenching provisions. It may be thread relieved. See also ROD, THREADED END and ROD, CONTINUOUS THREAD.
|
Manufacturer Information:
| 38300P4 | 77445 | RTX CORPORATION |
|
Techincal Specification:
| HARDNESS RATING | 26.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM | | OVERALL LENGTH | 2.156 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 6320 ASSN STD SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL COMP 8735 | | NOMINAL THREAD SIZE | 0.375 INCHES NUT THREAD | | NOMINAL THREAD SIZE | 0.375 INCHES STUD THREAD | | SPECIAL FEATURES | STUD END THREAD 0.004 IN. OVERSIZE | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | AMS 2400 ASSN STD SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | CADMIUM OVERALL | | THREAD CLASS | 3A NUT THREAD | | THREAD DIRECTION | RIGHT-HAND NUT THREAD | | THREAD DIRECTION | RIGHT-HAND STUD THREAD | | THREAD LENGTH | 0.750 INCHES MINIMUM STUD THREAD | | THREAD LENGTH | 1.125 INCHES MINIMUM NUT THREAD | | THREAD PITCH DIAMETERS | +0.3427 TO 0.3451 INCHES STUD THREAD | | THREAD QUANTITY PER INCH | 16 STUD THREAD | | THREAD QUANTITY PER INCH | 24 NUT THREAD | | THREAD SERIES DESIGNATOR | UNF NUT THREAD | | THREAD SERIES DESIGNATOR | UNS STUD THREAD |
|
|