|
|
|
National Stock Number:
5307-00-141-2653
Federal Supply Class:
5307
National Item Identification Number:
001412653
Description:
STUD,PLAIN
Detail:
A headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. The maximum diameter of the unthreaded portion must not be greater than the nominal thread diameter plus 0.020 inches (0.508 mm). The unthreaded portion must be without locking or wrenching provisions. It may be thread relieved. See also ROD, THREADED END and ROD, CONTINUOUS THREAD.
|
Manufacturer Information:
| 2162150 | 11862 | GENERAL MOTORS CORP CHEVROLET MOTOR DIV SPECIAL PRODUCTS DEPT | | 2162150 | 24617 | GENERAL MOTORS CORP | | 2162150 | 7X677 | GENERAL MOTORS LLC | | 35-2162150 | 16662 | LIFT PARTS MFG CO INC DIV OF ECHLIN MFG CO THE | | 35-2162150 | 66654 | TVH PARTS CO. |
|
Techincal Specification:
| HARDNESS RATING | 23.0 ROCKWELL C MINIMUM AND 30.0 ROCKWELL C MAXIMUM | | OVERALL LENGTH | 2.750 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-633 FED SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL COMP 1040 | | NOMINAL THREAD SIZE | 0.625 INCHES NUT THREAD | | NOMINAL THREAD SIZE | 0.625 INCHES STUD THREAD | | SPECIAL FEATURES | TAPERED THREAD FROM 0.563 IN. MIN,0.566 IN. MAX PITCH DIA AT STUD END TO 0.572 IN. MIN,0.575 IN. MAX PITCH DIA AT SHOULDER | | SURFACE TREATMENT | CHROMIUM OVERALL | | THREAD CLASS | 3A NUT THREAD | | THREAD DIRECTION | RIGHT-HAND NUT THREAD | | THREAD DIRECTION | RIGHT-HAND STUD THREAD | | THREAD LENGTH | 0.875 INCHES MAXIMUM STUD THREAD | | THREAD LENGTH | 1.625 INCHES MAXIMUM NUT THREAD | | THREAD SERIES DESIGNATOR | UNC NUT THREAD | | THREAD SERIES DESIGNATOR | UNC STUD THREAD | | THREAD PITCH DIAMETERS | +0.5630 TO 0.5660 INCHES STUD THREAD | | THREAD QUANTITY PER INCH | 11 NUT THREAD | | THREAD QUANTITY PER INCH | 11 STUD THREAD |
|
|