|
|
|
National Stock Number:
5306-01-564-1413
Federal Supply Class:
5306
National Item Identification Number:
015641413
Description:
BOLT,CLOSE TOLERANCE
Detail:
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see BOLT, SHEAR. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see BOLT, MACHINE.
|
Manufacturer Information:
| NA0036D120022 | 80205 | NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE |
|
Techincal Specification:
| EXTERNAL THREAD TOLERANCE CLASS | 4H6H | | FASTENER LENGTH | 38.0 MILLIMETERS NOMINAL | | GRIP DIAMETER | 11.959 MILLIMETERS MINIMUM AND 11.984 MILLIMETERS MAXIMUM | | GRIP LENGTH | 22.0 MILLIMETERS NOMINAL | | HEAD HEIGHT | 5.7 MILLIMETERS MINIMUM AND 6.0 MILLIMETERS MAXIMUM | | HEAD STYLE | HEXAGON | | HOLE CONFIGURATION STYLE | ROUND LONGITUDINAL HOLE | | HOLE DIAMETER | 0.4 MILLIMETERS NOMINAL | | HOLE QUANTITY | 1 | | HOLE TYPE | DRILLED | | MATERIAL | STEEL OVERALL | | MINIMUM TENSILE STRENGTH | 1100 MEGAPASCALS | | NOMINAL THREAD DIAMETER | 12.0 MILLIMETERS | | POINT DIAMETER | 9.9 MILLIMETERS MINIMUM AND 10.4 MILLIMETERS MAXIMUM | | POINT STYLE | FLAT | | WIDTH BETWEEN FLATS | 21.1 MILLIMETERS MINIMUM | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TYPE II, CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | CADMIUM OVERALL | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 16.0 MILLIMETERS NOMINAL | | THREAD SERIES DESIGNATOR | MJ | | THREAD PITCH IN MILLIMETERS | 1.25 |
|
|