|
|
|
National Stock Number:
5306-01-562-4830
Federal Supply Class:
5306
National Item Identification Number:
015624830
Description:
BOLT,SHEAR
Detail:
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See BOLT, MACHINE and BOLT, CLEVIS.
|
Manufacturer Information:
| 111210-4 | 80539 | SPS TECHNOLOGIES, LLC |
|
Techincal Specification:
| COUNTERSINK ANGLE | 121.0 DEGREES MINIMUM AND 123.0 DEGREES MAXIMUM | | GRIP LENGTH | 0.640 INCHES MINIMUM AND 0.672 INCHES MAXIMUM | | GRIP DIAMETER | 0.177 INCHES MINIMUM AND 0.197 INCHES MAXIMUM | | HEAD HEIGHT | 0.033 INCHES MINIMUM AND 0.290 INCHES MAXIMUM | | HEAD DIAMETER | 0.338 INCHES MINIMUM AND 0.495 INCHES MAXIMUM | | HEAD STYLE | FILLISTER COUNTERSUNK | | HOLE CONFIGURATION STYLE | ROUND INTERNAL TORX | | HOLE DIAMETER | 0.205 INCHES MINIMUM AND 0.215 INCHES MAXIMUM | | HOLE TYPE | DRILLED | | PART NAME ASSIGNED BY CONTROLLING AGENCY | BOLT, SHEAR, 130 DEGREE FLUSH HEAD | | MATERIAL | TITANIUM ALLOY OVERALL | | NOMINAL THREAD DIAMETER | 0.188 INCHES | | WIDTH BETWEEN FLATS | 0.349 INCHES NOMINAL | | THREAD CLASS | 1A | | THREAD DIRECTION | RIGHT-HAND | | THREAD SERIES DESIGNATOR | UNJF |
|
|