|
|
|
National Stock Number:
5306-01-528-8572
Federal Supply Class:
5306
National Item Identification Number:
015288572
Description:
BOLT,CLOSE TOLERANCE
Detail:
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see BOLT, SHEAR. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see BOLT, MACHINE.
|
Manufacturer Information:
| 11833-3H2 | 59563 | REID PRODUCTS INC. | | AIC688-3H2 | 06725 | SPS TECHNOLOGIES, LLC | | GS1031-3H2 | 1EM77 | B & B SPECIALTIES INC | | MB155-3H2 | 73197 | HI-SHEAR CORPORATION | | PBF1266-3H2 | 27624 | SPS TECHNOLOGIES LLC | | SLB254-3H2 | 16258 | SPACE-LOK, INC. | | ST3M747-3H2 | 1VSL7 | HOUSTON PRECISION FASTENERS I LP | | ST3M747-3H2 | 58998 | FASTENER INNOVATION TECHNOLOGY, INC. | | ST3M747-3H2 | 76301 | THE BOEING COMPANY | | VCG0002-3H2 | 06710 | VALLEY-TODECO, INC. |
|
Techincal Specification:
| CRITICALITY CODE JUSTIFICATION | AGAV | | FASTENER LENGTH | 0.440 INCHES MINIMUM AND 0.487 INCHES MAXIMUM | | GRIP DIAMETER | 0.1885 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM | | GRIP LENGTH | 0.115 INCHES MINIMUM AND 0.135 INCHES MAXIMUM | | HEAD HEIGHT | 0.140 INCHES NOMINAL | | HEAD MINOR DIAMETER | 0.386 INCHES NOMINAL | | HEAD STYLE | SPLINE DRIVE SHEAR HEAD | | HOLE CONFIGURATION STYLE | SPLINE | | HOLE DIAMETER | 0.041 INCHES MINIMUM AND 0.051 INCHES MAXIMUM | | HOLE QUANTITY | 1 | | HOLE TYPE | DRILLED | | PART NAME ASSIGNED BY CONTROLLING AGENCY | BOLT,CLOSE TOLERANCE,SPLINE DRIVE, CRES (125 KSI FSU) | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP XM-13 OVERALL | | NOMINAL THREAD DIAMETER | 0.190 INCHES | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | AMS-QQ-P-35 ASSN STD SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | PASSIVATE OVERALL | | THREAD CLASS | 3A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.331 INCHES NOMINAL | | THREAD SERIES DESIGNATOR | UNJF | | THREAD QUANTITY PER INCH | 32 |
|
|