|
|
|
National Stock Number:
5306-01-526-4347
Federal Supply Class:
5306
National Item Identification Number:
015264347
Description:
BOLT,CLOSE TOLERANCE
Detail:
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see BOLT, SHEAR. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see BOLT, MACHINE.
|
Manufacturer Information:
| 03A098-8-38 | 1W025 | NORTHROP GRUMMAN SYSTEMS CORP | | 123709-8-38 | 80539 | SPS TECHNOLOGIES, LLC | | AIC1653-8-38 | 06725 | SPS TECHNOLOGIES, LLC | | MB209AP-8-38 | 73197 | HI-SHEAR CORPORATION | | MB209AP-8-38 | L4528 | LISI AEROSPACE CANADA CORP DIV HI SHEAR HOLDINGS INC | | PBF1420-8-38 | 27624 | SPS TECHNOLOGIES LLC | | SII1188-8-38 | 57928 | SONIC INDUSTRIES, INC. | | VCJ0001-8-38 | 06710 | VALLEY-TODECO, INC. |
|
Techincal Specification:
| FASTENER LENGTH | 1.173 INCHES MINIMUM AND 1.852 INCHES MAXIMUM | | GRIP DIAMETER | 0.4985 INCHES MINIMUM AND 0.4995 INCHES MAXIMUM | | GRIP LENGTH | 1.178 INCHES MINIMUM AND 1.198 INCHES MAXIMUM | | HEAD HEIGHT | 0.271 INCHES MINIMUM AND 0.291 INCHES MAXIMUM | | HEAD MINOR DIAMETER | 0.772 INCHES MINIMUM | | HEAD STYLE | SPLINE DRIVE SHEAR HEAD | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS5662 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | NICKEL ALLOY 718 OVERALL | | MINIMUM TENSILE STRENGTH | 125000 POUNDS PER SQUARE INCH | | NOMINAL THREAD DIAMETER | 0.500 INCHES | | SURFACE FINISH | 32.0 MICROINCHES GRIP | | SURFACE FINISH | 32.0 MICROINCHES THREADS | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | PASSIVATE OVERALL | | THREAD CLASS | 3A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.649 INCHES NOMINAL | | THREAD SERIES DESIGNATOR | UNJF | | THREAD QUANTITY PER INCH | 20 |
|
|