|
|
|
National Stock Number:
5306-01-522-0629
Federal Supply Class:
5306
National Item Identification Number:
015220629
Description:
BOLT,CLOSE TOLERANCE
Detail:
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see BOLT, SHEAR. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see BOLT, MACHINE.
|
Manufacturer Information:
| 120978-4-7R | 56878 | SPS TECHNOLOGIES, LLC | | 120978-4-7R | 80539 | SPS TECHNOLOGIES, LLC | | AIC596-4-7R | 06725 | SPS TECHNOLOGIES, LLC | | C7521-4-7R | 81755 | LOCKHEED MARTIN CORPORATION | | H411-4-7R | 17446 | HUCK INTERNATIONAL, INC | | PBF7521-4-7R | 27624 | SPS TECHNOLOGIES LLC | | VCG0009-4-7R | 06710 | VALLEY-TODECO, INC. | | VS3133-4-7R | 92215 | HOWMET GLOBAL FASTENING SYSTEMS INC |
|
Techincal Specification:
| FASTENER LENGTH | 0.778 INCHES NOMINAL | | GRIP LENGTH | 0.250 INCHES NOMINAL | | GRIP DIAMETER | 0.2483 INCHES MINIMUM AND 0.2492 INCHES MAXIMUM | | HEAD HEIGHT | 0.164 INCHES NOMINAL | | HEAD MINOR DIAMETER | 0.422 INCHES MINIMUM AND 0.446 INCHES MAXIMUM | | HEAD STYLE | SPLINE DRIVE SHEAR HEAD | | PART NAME ASSIGNED BY CONTROLLING AGENCY | BOLT,EXTERNAL WRENCHING,SPLINE DRIVE,132 KSI SHEAR | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS6487 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP H11 OVERALL | | NOMINAL THREAD DIAMETER | 0.250 INCHES | | SPECIAL FEATURES | THREADS .0156 OVERSIZE,RESTRICTED TO REPAIR WORK ONLY | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | NAS672 ASSN STD SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | CADMIUM OVERALL | | THREAD CLASS | 3A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.370 INCHES NOMINAL | | THREAD QUANTITY PER INCH | 28 | | THREAD SERIES DESIGNATOR | UNJF |
|
|