|
|
|
National Stock Number:
5306-01-520-8961
Federal Supply Class:
5306
National Item Identification Number:
015208961
Description:
BOLT,SHEAR
Detail:
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See BOLT, MACHINE and BOLT, CLEVIS.
|
Manufacturer Information:
| BACB30LH3K4 | 06725 | SPS TECHNOLOGIES, LLC | | BACB30LH3K4 | 17943 | FEDERAL MANUFACTURING CORP | | BACB30LH3K4 | 1RC86 | HOWMET GLOBAL FASTENING SYSTEMS INC | | BACB30LH3K4 | 27624 | SPS TECHNOLOGIES LLC | | BACB30LH3K4 | 56878 | SPS TECHNOLOGIES, LLC | | BACB30LH3K4 | 81205 | THE BOEING COMPANY |
|
Techincal Specification:
| COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM | | FASTENER LENGTH | 0.595 INCHES NOMINAL | | GRIP DIAMETER | 0.1885 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM | | GRIP LENGTH | 0.250 INCHES NOMINAL | | HEAD DIAMETER | 0.383 INCHES NOMINAL | | HEAD STYLE | FLAT COUNTERSUNK | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS5737 ASSN STD SINGLE MATERIAL RESPONSE HEAD | | MATERIAL | PLASTIC POLYAMIDE LOCKING FEATURE | | MATERIAL | STEEL CORROSION RESISTING HEAD | | MINIMUM TENSILE STRENGTH | 95000 POUNDS PER SQUARE INCH | | NOMINAL THREAD DIAMETER | 0.190 INCHES | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | BMS10-85, TYPE I ASSN STD SINGLE TREATMENT RESPONSE HEAD | | SURFACE TREATMENT | ALUMINUM HEAD | | THREAD CLASS | 3A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.345 INCHES NOMINAL | | THREAD SERIES DESIGNATOR | UNJF | | THREAD QUANTITY PER INCH | 32 |
|
|