|
|
|
National Stock Number:
5306-01-520-4143
Federal Supply Class:
5306
National Item Identification Number:
015204143
Description:
BOLT,CLOSE TOLERANCE
Detail:
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see BOLT, SHEAR. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see BOLT, MACHINE.
|
Manufacturer Information:
| NAS8702U3 | 80205 | NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE |
|
Techincal Specification:
| COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM | | FASTENER LENGTH | 0.496 INCHES MINIMUM AND 0.526 INCHES MAXIMUM | | GRIP DIAMETER | 0.1630 INCHES MINIMUM AND 0.1635 INCHES MAXIMUM | | GRIP LENGTH | 0.178 INCHES MINIMUM AND 0.198 INCHES MAXIMUM | | HEAD DIAMETER | 0.226 INCHES MINIMUM AND 0.257 INCHES MAXIMUM | | HEAD HEIGHT | 0.010 INCHES MAXIMUM | | HEAD STYLE | FILLISTER COUNTERSUNK | | PART NAME ASSIGNED BY CONTROLLING AGENCY | BOLT, 100 DEGREES REDUCED HEAD, PHILLIPS-RECESS, CLOSE TOLERANCE, A-286 SHORT THREAD | | MATERIAL | STEEL CORROSION RESISTING OVERALL | | NOMINAL THREAD DIAMETER | 0.164 INCHES | | SURFACE TREATMENT | PASSIVATE OVERALL | | THREAD CLASS | 3A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.323 INCHES NOMINAL | | THREAD SERIES DESIGNATOR | UNJC | | THREAD QUANTITY PER INCH | 32 |
|
|