|
|
|
National Stock Number:
5306-01-517-8623
Federal Supply Class:
5306
National Item Identification Number:
015178623
Description:
BOLT,CLOSE TOLERANCE
Detail:
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see BOLT, SHEAR. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see BOLT, MACHINE.
|
Manufacturer Information:
| BACB30LL4U30 | 81205 | THE BOEING COMPANY | | NAS8704U30 | 81205 | THE BOEING COMPANY |
|
Techincal Specification:
| COUNTERSINK ANGLE | 101.0 DEGREES NOMINAL | | FASTENER LENGTH | 2.552 INCHES NOMINAL | | GRIP DIAMETER | 0.2490 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM | | GRIP LENGTH | 2.245 INCHES NOMINAL | | HEAD DIAMETER | 0.355 INCHES MINIMUM AND 0.397 INCHES MAXIMUM | | HEAD HEIGHT | 0.014 INCHES NOMINAL | | HEAD STYLE | FILLISTER COUNTERSUNK | | HOLE CONFIGURATION STYLE | ROUND | | HOLE QUANTITY | 1 | | HOLE TYPE | DRILLED | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS5731 ASSN STD SINGLE MATERIAL RESPONSE OR AMS5737 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL CORROSION RESISTING OVERALL | | NOMINAL THREAD DIAMETER | 0.250 INCHES | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | NAS4003 ASSN STD SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | PASSIVATE OVERALL | | THREAD CLASS | 3A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.370 INCHES NOMINAL | | THREAD SERIES DESIGNATOR | UNJF | | THREAD QUANTITY PER INCH | 28 |
|
|