|
|
|
National Stock Number:
5306-01-517-5195
Federal Supply Class:
5306
National Item Identification Number:
015175195
Description:
BOLT,CLOSE TOLERANCE
Detail:
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see BOLT, SHEAR. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see BOLT, MACHINE.
|
Manufacturer Information:
| BACB30LJ4U111 | 06725 | SPS TECHNOLOGIES, LLC | | BACB30LJ4U111 | 56878 | SPS TECHNOLOGIES, LLC | | BACB30LJ4U111 | 81205 | THE BOEING COMPANY |
|
Techincal Specification:
| FASTENER LENGTH | 7.3115 INCHES MINIMUM AND 7.3415 INCHES MAXIMUM | | GRIP DIAMETER | 0.2490 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM | | GRIP LENGTH | 6.9275 INCHES MINIMUM AND 6.9475 INCHES MAXIMUM | | HEAD HEIGHT | 0.125 INCHES MINIMUM AND 0.140 INCHES MAXIMUM | | HEAD STYLE | HEXAGON | | MATERIAL DOCUMENT AND CLASSIFICATION | SAE-AMS 5737 ASSN STD SINGLE MATERIAL RESPONSE OVERALL OR SAE-AMS 5853 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | IRON ALLOY 660 OVERALL | | PROPRIETARY CHARACTERISTICS | PACS | | MINIMUM TENSILE STRENGTH | 95000 POUNDS PER SQUARE INCH | | NOMINAL THREAD DIAMETER | 0.2500 INCHES | | SPECIAL FEATURES | MAXIMUM SERVICE TEMPERATURE 1200.0 DEGREES F; MAY HAVE EITHER FLAT OR DISHED HEXAGON HEAD | | WIDTH BETWEEN FLATS | 0.430 INCHES MINIMUM AND 0.439 INCHES MAXIMUM | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | SAE-AMS-QQ-P-35, TYPE II OR TYPE VIII ASSN STD SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | PASSIVATE OVERALL | | THREAD CLASS | 3A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.389 INCHES NOMINAL | | THREAD QUANTITY PER INCH | 28 | | THREAD SERIES DESIGNATOR | UNJF |
|
|