5306-01-351-3505, BOLT,SHEAR

National Stock Number:
5306-01-351-3505

Federal Supply Class:
5306

National Item Identification Number:
013513505

Description:
BOLT,SHEAR

Detail:
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See BOLT, MACHINE and BOLT, CLEVIS.

Manufacturer Information:

NAS6304LU5H

80205

NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE

Techincal Specification:

FASTENER LENGTH	0.667 INCHES MINIMUM AND 0.697 INCHES MAXIMUM
GRIP DIAMETER	0.2490 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM
GRIP LENGTH	0.302 INCHES MINIMUM AND 0.322 INCHES MAXIMUM
HEAD HEIGHT	0.125 INCHES MINIMUM AND 0.140 INCHES MAXIMUM
HEAD STYLE	DISHED HEXAGON
HOLE CONFIGURATION STYLE	HEXAGON CORNERS
HOLE DIAMETER	0.046 INCHES MINIMUM AND 0.056 INCHES MAXIMUM
HOLE QUANTITY	3
HOLE TYPE	DRILLED
MATERIAL DOCUMENT AND CLASSIFICATION	AMS 5731 ASSN STD SINGLE MATERIAL RESPONSE OR AMS 5737 ASSN STD SINGLE MATERIAL RESPONSE FASTENER
MATERIAL	PLASTIC POLYAMIDE LOCKING FEATUREIRON ALLOY 660 FASTENER
MINIMUM TENSILE STRENGTH	160000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER	0.250 INCHES
WIDTH BETWEEN FLATS	0.429 INCHES MINIMUM AND 0.439 INCHES MAXIMUM
SPECIFICATION/STANDARD DATA	80205-NAS6304 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
SURFACE FINISH	32.0 MICROINCHES BEARING SURFACE OF HEAD32.0 MICROINCHES GRIP32.0 MICROINCHES THREADS
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE FASTENER
SURFACE TREATMENT	PASSIVATE FASTENER
THREAD CLASS	3A
THREAD DIRECTION	RIGHT-HAND
THREAD LENGTH	0.370 INCHES NOMINAL
THREAD SERIES DESIGNATOR	UNJF
THREAD QUANTITY PER INCH	28

Click here to Register for Free 30-day Trial