|
|
|
National Stock Number:
5306-01-351-3498
Federal Supply Class:
5306
National Item Identification Number:
013513498
Description:
BOLT,SHEAR
Detail:
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See BOLT, MACHINE and BOLT, CLEVIS.
|
Manufacturer Information:
| 03A100-5D8 | 1W025 | NORTHROP GRUMMAN SYSTEMS CORP | | 03A100-5D8 | 76823 | NORTHROP GRUMMAN SYSTEMS CORPORATION | | 123711-5D8 | 56878 | SPS TECHNOLOGIES, LLC | | AIC1655-5D8 | 06725 | SPS TECHNOLOGIES, LLC | | MB211-5D8 | 73197 | HI-SHEAR CORPORATION | | MB211-5D8 | L4528 | LISI AEROSPACE CANADA CORP DIV HI SHEAR HOLDINGS INC | | PBF1422-5D8 | 27624 | SPS TECHNOLOGIES LLC | | SII1185-5D8 | 57928 | SONIC INDUSTRIES, INC. | | VCG0017-5D8 | 06710 | VALLEY-TODECO, INC. | | VS3320-5D8 | 92215 | HOWMET GLOBAL FASTENING SYSTEMS INC | | VS3320-5D8 | 9N513 | VOI-SHAN/CHATSWORTH DIV OF VSI CORP SUB OF FAIRCHILD INDUSTRIES INC | | X385-5D8 | 17446 | HUCK INTERNATIONAL, INC | | X385-5D8 | 97928 | HUCK INTL INC |
|
Techincal Specification:
| DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | 0.835 INCHES NOMINAL FIRST HOLE | | EXTENDED WASHER DIAMETER | 0.521 INCHES MINIMUM AND 0.531 INCHES MAXIMUM | | EXTENDED WASHER THICKNESS | 0.051 INCHES MINIMUM AND 0.071 INCHES MAXIMUM | | FASTENER LENGTH | 1.023 INCHES MINIMUM AND 1.053 INCHES MAXIMUM | | GRIP DIAMETER | 0.3115 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM | | GRIP LENGTH | 0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM | | HEAD HEIGHT | 0.302 INCHES MINIMUM AND 0.322 INCHES MAXIMUM | | HEAD MINOR DIAMETER | 0.360 INCHES MINIMUM AND 0.375 INCHES MAXIMUM | | HEAD STYLE | SPLINE EXTENDED WASHER | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS5662 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | NICKEL ALLOY 718 OVERALL | | MINIMUM TENSILE STRENGTH | 180000 POUNDS PER SQUARE INCH | | NOMINAL THREAD DIAMETER | 0.3125 INCHES | | SHANK UNTHREADED HOLE DIAMETER | 0.076 INCHES MINIMUM AND 0.081 INCHES MAXIMUM FIRST HOLE | | SURFACE FINISH | 32.0 MICROINCHES BEARING SURFACE OF HEAD32.0 MICROINCHES GRIP32.0 MICROINCHES THREADS | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | PASSIVATE OVERALL | | THREAD CLASS | 3A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.538 INCHES NOMINAL | | THREAD SERIES DESIGNATOR | UNJF | | THREAD QUANTITY PER INCH | 24 |
|
|