|
|
|
National Stock Number:
5306-01-351-1751
Federal Supply Class:
5306
National Item Identification Number:
013511751
Description:
BOLT,SHEAR
Detail:
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See BOLT, MACHINE and BOLT, CLEVIS.
|
Manufacturer Information:
| 110671-5-5 | 80539 | SPS TECHNOLOGIES, LLC | | GB511CE5-5 | 26512 | NORTHROP GRUMMAN SYSTEMS CORPORATION | | PBF1308-5-5 | 27624 | SPS TECHNOLOGIES LLC |
|
Techincal Specification:
| FASTENER LENGTH | 0.647 INCHES MINIMUM AND 0.694 INCHES MAXIMUM | | GRIP DIAMETER | 0.3115 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM | | GRIP LENGTH | 0.302 INCHES MINIMUM AND 0.322 INCHES MAXIMUM | | HEAD HEIGHT | 0.156 INCHES MINIMUM AND 0.187 INCHES MAXIMUM | | HEAD STYLE | HEXAGON | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 4967 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | TITANIUM ALLOY UNS R56400 OVERALL | | MINIMUM TENSILE STRENGTH | 160000 POUNDS PER SQUARE INCH | | MINIMUM YIELD STRENGTH | 95000 POUNDS PER SQUARE INCH | | NOMINAL THREAD DIAMETER | 0.312 INCHES | | PART NAME ASSIGNED BY CONTROLLING AGENCY | NAVY SPECIAL PROJECT | | WIDTH BETWEEN FLATS | 0.492 INCHES MINIMUM AND 0.502 INCHES MAXIMUM | | THREAD CLASS | 3A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.351 INCHES NOMINAL | | THREAD SERIES DESIGNATOR | UNJF | | THREAD QUANTITY PER INCH | 24 |
|
|