|
|
|
National Stock Number:
5306-01-350-2902
Federal Supply Class:
5306
National Item Identification Number:
013502902
Description:
BOLT,SHEAR
Detail:
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See BOLT, MACHINE and BOLT, CLEVIS.
|
Manufacturer Information:
| 92147-20D36A | 56878 | SPS TECHNOLOGIES, LLC | | GB511GG20D36A | 26512 | NORTHROP GRUMMAN SYSTEMS CORPORATION | | PBF1479-20D36 | 27624 | SPS TECHNOLOGIES LLC | | PBF1479-20D36A | 27624 | SPS TECHNOLOGIES LLC | | VCD0020-20D36A | 06710 | VALLEY-TODECO, INC. |
|
Techincal Specification:
| DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | 3.395 INCHES NOMINAL FIRST HOLE | | FASTENER LENGTH | 3.674 INCHES MINIMUM AND 3.721 INCHES MAXIMUM | | GRIP DIAMETER | 1.2485 INCHES MINIMUM AND 1.2490 INCHES MAXIMUM | | GRIP LENGTH | 2.250 INCHES NOMINAL | | HEAD HEIGHT | 0.680 INCHES MINIMUM AND 0.700 INCHES MAXIMUM | | HEAD STYLE | DOUBLE HEXAGON | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5662 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | NICKEL ALLOY 718 OVERALL | | MINIMUM TENSILE STRENGTH | 220000 POUNDS PER SQUARE INCH | | NOMINAL THREAD DIAMETER | 1.250 INCHES | | PART NAME ASSIGNED BY CONTROLLING AGENCY | NAVY SPECIAL PROJECT | | SHANK UNTHREADED HOLE DIAMETER | 0.136 INCHES MINIMUM AND 0.146 INCHES MAXIMUM FIRST HOLE | | WIDTH BETWEEN FLATS | 1.801 INCHES MINIMUM AND 1.814 INCHES MAXIMUM | | SURFACE FINISH | 32.0 MICROINCHES GRIP | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | PASSIVATE OVERALL | | THREAD CLASS | 3A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 1.440 INCHES NOMINAL | | THREAD SERIES DESIGNATOR | UNJF | | THREAD QUANTITY PER INCH | 12 |
|
|