|
|
|
National Stock Number:
5306-01-345-3753
Federal Supply Class:
5306
National Item Identification Number:
013453753
Description:
BOLT,CLOSE TOLERANCE
Detail:
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see BOLT, SHEAR. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see BOLT, MACHINE.
|
Manufacturer Information:
| 84725-4-14 | 56878 | SPS TECHNOLOGIES, LLC | | GB511GF4-14 | 06710 | VALLEY-TODECO, INC. | | GB511GF4-14 | 26512 | NORTHROP GRUMMAN SYSTEMS CORPORATION | | GB511GF4-14 | 27624 | SPS TECHNOLOGIES LLC | | GB511GF4-14 | 56878 | SPS TECHNOLOGIES, LLC | | PBF1478-4-14 | 27624 | SPS TECHNOLOGIES LLC | | VCC0090-4-14 | 06710 | VALLEY-TODECO, INC. |
|
Techincal Specification:
| EXTENDED WASHER DIAMETER | 0.428 INCHES MINIMUM AND 0.438 INCHES MAXIMUM | | EXTENDED WASHER THICKNESS | 0.069 INCHES NOMINAL | | FASTENER LENGTH | 1.287 INCHES NOMINAL | | GRIP DIAMETER | 0.2490 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM | | GRIP LENGTH | 0.865 INCHES MINIMUM AND 0.885 INCHES MAXIMUM | | HEAD HEIGHT | 0.290 INCHES MINIMUM AND 0.310 INCHES MAXIMUM | | HEAD STYLE | DOUBLE HEXAGON W/HOLE | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5662 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | NICKEL ALLOY 718 OVERALL | | NOMINAL THREAD DIAMETER | 0.250 INCHES | | WIDTH BETWEEN FLATS | 0.304 INCHES MINIMUM AND 0.313 INCHES MAXIMUM | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | PASSIVATE OVERALL | | THREAD CLASS | 3A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.412 INCHES NOMINAL | | THREAD SERIES DESIGNATOR | UNJF | | THREAD QUANTITY PER INCH | 28 |
|
|