|
|
|
National Stock Number:
5306-01-343-1752
Federal Supply Class:
5306
National Item Identification Number:
013431752
Description:
BOLT,SHEAR
Detail:
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See BOLT, MACHINE and BOLT, CLEVIS.
|
Manufacturer Information:
| GB511GF-12-55 | 06725 | SPS TECHNOLOGIES, LLC | | GB511GF-12-55 | 56878 | SPS TECHNOLOGIES, LLC | | GB511GF12-55 | 26512 | NORTHROP GRUMMAN SYSTEMS CORPORATION | | PBF1478-12-55 | 27624 | SPS TECHNOLOGIES LLC | | PBF14780-12-55 | 27624 | SPS TECHNOLOGIES LLC | | VCC0090-12-55 | 06710 | VALLEY-TODECO, INC. |
|
Techincal Specification:
| EXTENDED WASHER DIAMETER | 1.220 INCHES MINIMUM AND 1.230 INCHES MAXIMUM | | EXTENDED WASHER THICKNESS | 0.178 INCHES NOMINAL | | FASTENER LENGTH | 4.431 INCHES MINIMUM AND 4.461 INCHES MAXIMUM | | GRIP DIAMETER | 0.7485 INCHES MINIMUM AND 0.7490 INCHES MAXIMUM | | GRIP LENGTH | 3.427 INCHES MINIMUM AND 3.447 INCHES MAXIMUM | | HEAD HEIGHT | 0.701 INCHES MINIMUM AND 0.721 INCHES MAXIMUM | | HEAD STYLE | DOUBLE HEXAGON W/HOLE | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5662 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | NICKEL ALLOY 718 OVERALL | | MINIMUM TENSILE STRENGTH | 220000 POUNDS PER SQUARE INCH | | NOMINAL THREAD DIAMETER | 0.750 INCHES | | WIDTH BETWEEN FLATS | 0.803 INCHES MINIMUM AND 0.814 INCHES MAXIMUM | | SURFACE FINISH | 32.0 MICROINCHES BEARING SURFACE OF HEAD32.0 MICROINCHES GRIP | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | PASSIVATE OVERALL | | THREAD CLASS | 3A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 1.009 INCHES NOMINAL | | THREAD SERIES DESIGNATOR | UNJF | | THREAD QUANTITY PER INCH | 16 |
|
|