| FASTENER LENGTH | 1.091 INCHES MINIMUM AND 1.121 INCHES MAXIMUM |
| HEAD HEIGHT | 0.109 INCHES MINIMUM AND 0.640 INCHES MAXIMUM |
| HEAD STYLE | HEXAGON |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5732 ASSN STD SINGLE MATERIAL RESPONSE OR AMS 5737 ASSN STD SINGLE MATERIAL RESPONSE FASTENER |
| MATERIAL DOCUMENT AND CLASSIFICATION | ASTM A582 ASSN STD SINGLE MATERIAL RESPONSE PRIMARY WASHER |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5059 MIL SPEC SINGLE MATERIAL RESPONSE STAND-OFF |
| MATERIAL | IRON ALLOY 660 FASTENER |
| MATERIAL | STEEL COMP 301 PRIMARY WASHER |
| MATERIAL | STEEL COMP 303SE STAND-OFF |
| MINIMUM TENSILE STRENGTH | 140000 POUNDS PER SQUARE INCH |
| NOMINAL THREAD DIAMETER | 0.190 INCHES |
| SPECIAL FEATURES | ALSO CONTAINS TAB,CORROSION RESISTANT STEEL COMP 301 PER MIL-S-5059,PASSIVATED |
| PRIMARY WASHER MATERIAL THICKNESS | 0.020 INCHES MINIMUM AND 0.030 INCHES MAXIMUM |
| PRIMARY WASHER OUTSIDE DIAMETER | 0.420 INCHES NOMINAL |
| PRIMARY WASHER STYLE | FINISHING |
| WASHER QUANTITY | 1 |
| WIDTH BETWEEN FLATS | 0.367 INCHES MINIMUM AND 0.376 INCHES MAXIMUM |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE FASTENER |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE PRIMARY WASHER |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE STAND-OFF |
| SURFACE TREATMENT | PASSIVATE FASTENER |
| SURFACE TREATMENT | PASSIVATE PRIMARY WASHER |
| SURFACE TREATMENT | PASSIVATE STAND-OFF |
| THREAD CLASS | 3A |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD LENGTH | 0.451 INCHES MINIMUM AND 0.511 INCHES MAXIMUM |
| THREAD QUANTITY PER INCH | 32 |
| THREAD SERIES DESIGNATOR | UNJF |