|
|
|
National Stock Number:
5306-01-266-7314
Federal Supply Class:
5306
National Item Identification Number:
012667314
Description:
BOLT,EYE
Detail:
An externally threaded device whose threaded portion is of one nominal diameter, without a head, but with the unthreaded end either bent more than 225 degrees (3.925 radians) or cast, forged, or punched to resemble an eye. See also BOLT, HOOK. Excludes CONNECTOR, ROD END.
|
Manufacturer Information:
| AN42C4 | 80205 | NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE | | AN42C4 | 88044 | AERONAUTICAL STANDARDS GROUP DEPT OF NAVY AND AIR FORCE |
|
Techincal Specification:
| DISTANCE FROM THREADED END TO SHANK HOLE CENTER | 0.140 INCHES NOMINAL FIRST HOLE | | DISTANCE FROM CENTER OF EYE TO SHANK END | 0.937 INCHES NOMINAL | | EYE INSIDE DIAMETER | 0.190 INCHES MINIMUM AND 0.192 INCHES MAXIMUM | | EYE OUTSIDE WIDTH | 0.438 INCHES NOMINAL | | EYE STOCK THICKNESS | 0.089 INCHES MINIMUM AND 0.099 INCHES MAXIMUM | | HARDNESS RATING | 26.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM OVERALL | | OVERALL LENGTH | 1.187 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-18732 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP 431 OVERALL | | MINIMUM TENSILE STRENGTH | 125000 POUNDS PER SQUARE INCH | | NOMINAL THREAD DIAMETER | 0.190 INCHES | | SHANK UNTHREADED HOLE DIAMETER | 0.060 INCHES MINIMUM AND 0.080 INCHES MAXIMUM FIRST HOLE | | SHANK LENGTH | 0.516 INCHES MINIMUM AND 0.562 INCHES MAXIMUM | | SHOULDER DIAMETER | 0.438 INCHES NOMINAL | | SHOULDER THICKNESS | 0.062 INCHES NOMINAL | | STYLE DESIGNATOR | ROUND, CLOSED W/SHOULDER | | SURFACE TREATMENT | PASSIVATE OVERALL | | THREAD CLASS | 3 | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.406 INCHES NOMINAL | | THREAD QUANTITY PER INCH | 32 | | THREAD SERIES DESIGNATOR | UNF |
|
|