5306-01-259-7742, BOLT,SHEAR

National Stock Number:
5306-01-259-7742

Federal Supply Class:
5306

National Item Identification Number:
012597742

Description:
BOLT,SHEAR

Detail:
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See BOLT, MACHINE and BOLT, CLEVIS.

Manufacturer Information:

EWB 22-6H-4	56878	SPS TECHNOLOGIES, LLC
EWB 22-6H-4	80539	SPS TECHNOLOGIES, LLC

Techincal Specification:

EXTENDED WASHER DIAMETER	0.715 INCHES MINIMUM AND 0.725 INCHES MAXIMUM
EXTENDED WASHER THICKNESS	0.065 INCHES MINIMUM AND 0.085 INCHES MAXIMUM
FASTENER LENGTH	0.928 INCHES MINIMUM AND 0.948 INCHES MAXIMUM
GRIP DIAMETER	0.3735 INCHES MINIMUM AND 0.3745 INCHES MAXIMUM
GRIP LENGTH	0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM
HARDNESS RATING	46.0 ROCKWELL C MINIMUM AND 50.0 ROCKWELL C MAXIMUM OVERALL
HEAD HEIGHT	0.395 INCHES MINIMUM AND 0.415 INCHES MAXIMUM
HEAD STYLE	DOUBLE HEXAGON EXTENDED WASHER
HOLE CONFIGURATION STYLE	DOUBLE HEXAGON LONGITUDINAL HOLE
HOLE DIAMETER	0.050 INCHES MINIMUM AND 0.060 INCHES MAXIMUM
HOLE QUANTITY	4
HOLE TYPE	DRILLED
MATERIAL DOCUMENT AND CLASSIFICATION	AMS6487 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MATERIAL	STEEL COMP H11 OVERALL
MINIMUM TENSILE STRENGTH	220000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER	0.375 INCHES
SPECIAL FEATURES	PLATING THICKNESS MIN 0.0002,MAX 0.0004
WIDTH BETWEEN FLATS	0.492 INCHES MINIMUM AND 0.502 INCHES MAXIMUM
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	NAS 672 ASSN STD SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENT	CADMIUM OVERALL
THREAD CLASS	3A
THREAD DIRECTION	RIGHT-HAND
THREAD LENGTH	0.668 INCHES MINIMUM AND 0.708 INCHES MAXIMUM
THREAD QUANTITY PER INCH	24
THREAD SERIES DESIGNATOR	UNJF

Click here to Register for Free 30-day Trial