|
|
|
National Stock Number:
5306-01-218-7123
Federal Supply Class:
5306
National Item Identification Number:
012187123
Description:
BOLT,SHEAR
Detail:
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See BOLT, MACHINE and BOLT, CLEVIS.
|
Manufacturer Information:
| LD111-0021-0312 | 06710 | VALLEY-TODECO, INC. | | LD111-0021-0312 | 06725 | SPS TECHNOLOGIES, LLC | | LD111-0021-0312 | 06950 | HOWMET GLOBAL FASTENING SYSTEMS INC | | LD111-0021-0312 | 17446 | HUCK INTERNATIONAL, INC | | LD111-0021-0312 | 27624 | SPS TECHNOLOGIES LLC | | LD111-0021-0312 | 43999 | THE BOEING COMPANY | | LD111-0021-0312 | 56878 | SPS TECHNOLOGIES, LLC | | LD111-0021-0312 | 73197 | HI-SHEAR CORPORATION | | LD111-0021-0312 | 80539 | SPS TECHNOLOGIES, LLC |
|
Techincal Specification:
| EXTENDED WASHER DIAMETER | 0.340 INCHES MINIMUM AND 0.350 INCHES MAXIMUM | | EXTENDED WASHER THICKNESS | 0.064 INCHES NOMINAL | | FASTENER LENGTH | 1.125 INCHES MINIMUM AND 1.155 INCHES MAXIMUM | | GRIP DIAMETER | 0.1890 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM | | GRIP LENGTH | 0.750 INCHES NOMINAL | | HEAD HEIGHT | 0.196 INCHES NOMINAL | | HEAD STYLE | DOUBLE HEXAGON W/HOLE | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP XM-13 OVERALL | | MINIMUM TENSILE STRENGTH | 220000 POUNDS PER SQUARE INCH | | NOMINAL THREAD DIAMETER | 0.190 INCHES | | WIDTH BETWEEN FLATS | 0.243 INCHES MINIMUM AND 0.251 INCHES MAXIMUM | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | PASSIVATE OVERALL | | THREAD CLASS | 3A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.375 INCHES MINIMUM AND 0.405 INCHES MAXIMUM | | THREAD SERIES DESIGNATOR | UNJF | | THREAD QUANTITY PER INCH | 32 |
|
|