|
|
|
National Stock Number:
5306-01-216-4348
Federal Supply Class:
5306
National Item Identification Number:
012164348
Description:
BOLT,CLOSE TOLERANCE
Detail:
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see BOLT, SHEAR. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see BOLT, MACHINE.
|
Manufacturer Information:
| J816P003B | 07482 | GENERAL ELECTRIC COMPANY |
|
Techincal Specification:
| EXTENDED WASHER DIAMETER | 0.552 INCHES MINIMUM AND 0.572 INCHES MAXIMUM | | EXTENDED WASHER THICKNESS | 0.090 INCHES MINIMUM AND 0.100 INCHES MAXIMUM | | FASTENER LENGTH | 0.830 INCHES MINIMUM AND 0.850 INCHES MAXIMUM | | GRIP LENGTH | 0.151 INCHES MINIMUM AND 0.161 INCHES MAXIMUM | | GRIP DIAMETER | 0.3740 INCHES MINIMUM AND 0.3745 INCHES MAXIMUM | | HEAD HEIGHT | 0.373 INCHES MINIMUM AND 0.393 INCHES MAXIMUM | | HEAD STYLE | DOUBLE HEXAGON EXTENDED WASHER | | HOLE CONFIGURATION STYLE | DOUBLE HEXAGON FLATS | | HOLE DIAMETER | 0.060 INCHES MINIMUM AND 0.080 INCHES MAXIMUM | | HOLE QUANTITY | 1 | | HOLE TYPE | DRILLED | | MATERIAL DOCUMENT AND CLASSIFICATION | C50TF13 CL-B FSCM 07482 MFR REF SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | NICKEL ALLOY 718 OVERALL | | NOMINAL THREAD DIAMETER | 0.375 INCHES | | WIDTH BETWEEN FLATS | 0.438 INCHES NOMINAL | | SURFACE FINISH | 32.0 MICROINCHES GRIP | | SURFACE FINISH | 32.0 MICROINCHES THREADS | | THREAD CLASS | 3A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.669 INCHES MINIMUM AND 0.699 INCHES MAXIMUM | | THREAD QUANTITY PER INCH | 24 | | THREAD SERIES DESIGNATOR | UNJF |
|
|