5306-01-213-4822, BOLT,SHEAR

National Stock Number:
5306-01-213-4822

Federal Supply Class:
5306

National Item Identification Number:
012134822

Description:
BOLT,SHEAR

Detail:
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See BOLT, MACHINE and BOLT, CLEVIS.

Manufacturer Information:

SS5211-4H8	06725	SPS TECHNOLOGIES, LLC
SS5211-4H8	06950	HOWMET GLOBAL FASTENING SYSTEMS INC
SS5211-4H8	27624	SPS TECHNOLOGIES LLC
SS5211-4H8	50945	MERCURY AEROSPACE FASTENERS INC
SS5211-4H8	56878	SPS TECHNOLOGIES, LLC
SS5211-4H8	78286	SIKORSKY AIRCRAFT CORPORATION
SS5211-4H8	80539	SPS TECHNOLOGIES, LLC
SS5211-4H8	84256	AVIBANK MFG., INC.
SS5211-4H8	92215	HOWMET GLOBAL FASTENING SYSTEMS INC

Techincal Specification:

EXTENDED WASHER DIAMETER	0.428 INCHES MINIMUM AND 0.438 INCHES MAXIMUM
EXTENDED WASHER THICKNESS	0.059 INCHES MINIMUM AND 0.079 INCHES MAXIMUM
FASTENER LENGTH	0.791 INCHES MINIMUM AND 0.821 INCHES MAXIMUM
GRIP LENGTH	0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM
GRIP DIAMETER	0.2485 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM
HARDNESS RATING	39.0 ROCKWELL C MINIMUM AND 43.0 ROCKWELL C MAXIMUM OVERALL
HEAD HEIGHT	0.290 INCHES MINIMUM AND 0.310 INCHES MAXIMUM
HEAD STYLE	DOUBLE HEXAGON EXTENDED WASHER
HOLE CONFIGURATION STYLE	DOUBLE HEXAGON LONGITUDINAL HOLE
HOLE DIAMETER	0.032 INCHES MINIMUM AND 0.042 INCHES MAXIMUM
HOLE QUANTITY	4
HOLE TYPE	DRILLED
MATERIAL DOCUMENT AND CLASSIFICATION	MIL-S-8844,CL1 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
MATERIAL	STEEL COMP 4340 OVERALL
MINIMUM TENSILE STRENGTH	180000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER	0.250 INCHES
WIDTH BETWEEN FLATS	0.312 INCHES NOMINAL
SURFACE FINISH	32.0 MICROINCHES BEARING SURFACE OF HEAD
SURFACE FINISH	32.0 MICROINCHES GRIP
SURFACE FINISH	32.0 MICROINCHES THREADS
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	AMS 2401 ASSN STD 1ST TREATMENT RESPONSE AND QQ-P-416,TY2 FED SPEC 2ND TREATMENT RESPONSE OVERALL
SURFACE TREATMENT	CADMIUM AND CHROMATE OVERALL
THREAD CLASS	3A
THREAD DIRECTION	RIGHT-HAND
THREAD LENGTH	0.531 INCHES MINIMUM AND 0.581 INCHES MAXIMUM
THREAD QUANTITY PER INCH	28
THREAD SERIES DESIGNATOR	UNJF

Click here to Register for Free 30-day Trial