DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | 1.613 INCHES MINIMUM AND 1.663 INCHES MAXIMUM FIRST HOLE |
FASTENER LENGTH | 1.793 INCHES MINIMUM AND 1.823 INCHES MAXIMUM |
GRIP DIAMETER | 0.2485 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM |
GRIP LENGTH | 1.428 INCHES MINIMUM AND 1.448 INCHES MAXIMUM |
HARDNESS RATING | 36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM OVERALL |
HEAD HEIGHT | 0.125 INCHES MINIMUM AND 0.140 INCHES MAXIMUM |
HEAD STYLE | DISHED HEXAGON |
MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5000 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 2ND MATERIAL RESPONSE OR AMS6322 ASSN STD 2ND MATERIAL RESPONSE OVERALL |
MATERIAL | STEEL COMP E4340 OR STEEL COMP 8740 OVERALL |
MINIMUM TENSILE STRENGTH | 160000 POUNDS PER SQUARE INCH |
NOMINAL THREAD DIAMETER | 0.250 INCHES |
SHANK UNTHREADED HOLE DIAMETER | 0.076 INCHES MINIMUM AND 0.086 INCHES MAXIMUM FIRST HOLE |
WIDTH BETWEEN FLATS | 0.429 INCHES MINIMUM AND 0.439 INCHES MAXIMUM |
SPECIFICATION/STANDARD DATA | 80205-NAS6204 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
SURFACE FINISH | 32.0 MICROINCHES BEARING SURFACE OF HEAD |
SURFACE FINISH | 32.0 MICROINCHES GRIP |
SURFACE FINISH | 32.0 MICROINCHES THREADS |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
SURFACE TREATMENT | CADMIUM AND CHROMATE OVERALL |
THREAD CLASS | 3A |
THREAD DIRECTION | RIGHT-HAND |
THREAD LENGTH | 0.345 INCHES MINIMUM AND 0.395 INCHES MAXIMUM |
THREAD SERIES DESIGNATOR | UNJF |
THREAD QUANTITY PER INCH | 28 |