5306-01-210-0766 BOLT,INTERNAL WRENCHING Index 5305-01-210-0768 SETSCREW

National Stock Number:
5306-01-210-0767

Federal Supply Class:
5306

National Item Identification Number:
012100767

Description:
BOLT,MACHINE

Detail:
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. The threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. Head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. For items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, BOLT, SHEAR. See also SCREW, CAP, HEXAGON HEAD and SCREW, MACHINE.


Manufacturer Information:
MS35764-22896906MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M


Techincal Specification:
FASTENER LENGTH2.940 INCHES MINIMUM AND 3.000 INCHES MAXIMUM
FEATURES PROVIDEDFINISHED HEAD
HARDNESS RATING32.0 ROCKWELL C MINIMUM AND 38.0 ROCKWELL C MAXIMUM OVERALL
HEAD HEIGHT0.188 INCHES MINIMUM AND 0.198 INCHES MAXIMUM
HEAD STYLEHEXAGON
LOCKING FEATUREDISTORTIONS BEARING SURFACE OF HEAD
MATERIAL DOCUMENT AND CLASSIFICATIONSAE GRADE 8 ASSN STD ALL MATERIAL RESPONSES OVERALL
MATERIALSTEEL COMP 1013 OR STEEL COMP 1015 OR STEEL COMP 1016 OR STEEL COMP 1017 OR STEEL COMP 1018 OR STEEL COMP 1019 OR STEEL COMP 1020 OR STEEL COMP 1021 OR STEEL COMP 1022 OR STEEL COMP 1023 OR STEEL COMP 1524 OR STEEL COMP 1025 OR STEEL COMP 1026 OR STEEL COMP 1527 OR STEEL COMP 1029 OR STEEL COMP 1030 OR STEEL COMP 1033 OR STEEL COMP 1034 OR STEEL COMP 1035 OR STEEL COMP 1536 OR STEEL COMP 1037 OR STEEL COMP 1038 OR STEEL COMP 1039 OR STEEL COMP 1040 OR STEEL COMP 1541 OVERALL
MINIMUM TENSILE STRENGTH150000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER0.312 INCHES
WIDTH BETWEEN FLATS0.489 INCHES MINIMUM AND 0.500 INCHES MAXIMUM
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-P-16232 TY,ZCL,2 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENTPHOSPHATE ZINC OVERALL
THREAD CLASS2A
THREAD DIRECTIONRIGHT-HAND
THREAD LENGTH0.815 INCHES MINIMUM AND 1.392 INCHES MAXIMUM
THREAD SERIES DESIGNATORUNC
THREAD QUANTITY PER INCH18


Click here to Register for Free 30-day Trial