5306-01-209-7856 BOLT,EYE Index 5306-01-209-7858 BOLT,SHOULDER

National Stock Number:
5306-01-209-7857

Federal Supply Class:
5306

National Item Identification Number:
012097857

Description:
BOLT,SHOULDER

Detail:
An externally threaded fastener whose threaded portion is of one nominal diameter, No. 10 (0.190 IN.) (5 mm) or larger. It has a round unthreaded neck or shank all or part of which is of greater diameter than the threaded portion. The head is not designed to be held or driven with an inserted drivers. A locking feature may be incorporated in the design of the head or threads. For items with a thread diameter smaller than No. 10 (0.190 IN.) (5 mm) and those items with an inserted drive head, use SCREW, SHOULDER. For items which are No. 10 (0.190 IN.) (5 mm) or larger in size and are both shouldered and have an externally relieved body, use BOLT, EXTERNALLY RELIEVED BODY. Excludes THUMBSCREW.


Manufacturer Information:
74328-5D24Y56878SPS TECHNOLOGIES, LLC
74328-5D24Y80539SPS TECHNOLOGIES, LLC
AIC473D5-2406725SPS TECHNOLOGIES, LLC
BM3326-5D24Y17446HUCK INTERNATIONAL, INC
BM3326-5D24Y97928HUCK INTL INC
MB87-5D2473197HI-SHEAR CORPORATION
PBF1652-5D2427624SPS TECHNOLOGIES LLC
S11-1063-5D2457928SONIC INDUSTRIES, INC.
ST3M607-5D2459563REID PRODUCTS INC.
ST3M607-5D2476301THE BOEING COMPANY
VAL23033-5D24X06710VALLEY-TODECO, INC.
VS3061-5D2492215HOWMET GLOBAL FASTENING SYSTEMS INC


Techincal Specification:
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER1.828 INCHES MINIMUM AND 1.868 INCHES MAXIMUM FIRST HOLE
EXTENDED WASHER DIAMETER0.521 INCHES MINIMUM AND 0.531 INCHES MAXIMUM
EXTENDED WASHER THICKNESS0.072 INCHES MINIMUM AND 0.092 INCHES MAXIMUM
FASTENER LENGTH2.036 INCHES MINIMUM AND 2.066 INCHES MAXIMUM
HEAD HEIGHT0.338 INCHES MINIMUM AND 0.358 INCHES MAXIMUM
HEAD STYLEDOUBLE HEXAGON W/HOLE
MATERIAL DOCUMENT AND CLASSIFICATIONAMS5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MATERIALSTEEL COMP XM-13 OVERALL
MINIMUM TENSILE STRENGTH220000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER0.312 INCHES
SHOULDER LENGTH1.490 INCHES MINIMUM AND 1.510 INCHES MAXIMUM FIRST SHOULDER
SHOULDER SHAPEROUND FIRST SHOULDER
SHANK UNTHREADED HOLE DIAMETER0.076 INCHES MINIMUM AND 0.081 INCHES MAXIMUM FIRST HOLE
SHOULDER DIAMETER0.342 INCHES MINIMUM AND 0.343 INCHES MAXIMUM FIRST SHOULDER
WIDTH BETWEEN FLATS0.376 INCHES NOMINAL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENTPASSIVATE OVERALL
THREAD CLASS3A
THREAD DIRECTIONRIGHT-HAND
THREAD LENGTH0.526 INCHES MINIMUM AND 0.576 INCHES MAXIMUM
THREAD SERIES DESIGNATORUNJF
THREAD QUANTITY PER INCH24


Click here to Register for Free 30-day Trial

© 2024 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us