5306-01-207-7492 BOLT,SHOULDER Index 5306-01-207-7494 BOLT,SHOULDER

National Stock Number:
5306-01-207-7493

Federal Supply Class:
5306

National Item Identification Number:
012077493

Description:
BOLT,SHOULDER

Detail:
An externally threaded fastener whose threaded portion is of one nominal diameter, No. 10 (0.190 IN.) (5 mm) or larger. It has a round unthreaded neck or shank all or part of which is of greater diameter than the threaded portion. The head is not designed to be held or driven with an inserted drivers. A locking feature may be incorporated in the design of the head or threads. For items with a thread diameter smaller than No. 10 (0.190 IN.) (5 mm) and those items with an inserted drive head, use SCREW, SHOULDER. For items which are No. 10 (0.190 IN.) (5 mm) or larger in size and are both shouldered and have an externally relieved body, use BOLT, EXTERNALLY RELIEVED BODY. Excludes THUMBSCREW.


Manufacturer Information:
74328-6D44Y56878SPS TECHNOLOGIES, LLC
74328-6D44Y80539SPS TECHNOLOGIES, LLC
AIC473D6-4406725SPS TECHNOLOGIES, LLC
BM3326-6D44Y17446HUCK INTERNATIONAL, INC
BM3326-6D44Y97928HUCK INTL INC
MB87-6D4473197HI-SHEAR CORPORATION
MB87-6D44L4528LISI AEROSPACE CANADA CORP DIV HI SHEAR HOLDINGS INC
PBF1652-6D4427624SPS TECHNOLOGIES LLC
S11-1063-6D4457928SONIC INDUSTRIES, INC.
ST3M607-6D4459563REID PRODUCTS INC.
ST3M607-6D4476301THE BOEING COMPANY
VAL23033-6D44X06710VALLEY-TODECO, INC.
VS3061-6D4492215HOWMET GLOBAL FASTENING SYSTEMS INC


Techincal Specification:
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER3.126 INCHES MINIMUM AND 3.166 INCHES MAXIMUM FIRST HOLE
EXTENDED WASHER DIAMETER0.639 INCHES MINIMUM AND 0.649 INCHES MAXIMUM
EXTENDED WASHER THICKNESS0.081 INCHES MINIMUM AND 0.101 INCHES MAXIMUM
FASTENER LENGTH3.349 INCHES MINIMUM AND 3.379 INCHES MAXIMUM
HEAD HEIGHT0.378 INCHES MINIMUM AND 0.398 INCHES MAXIMUM
HEAD STYLEDOUBLE HEXAGON W/HOLE
MATERIAL DOCUMENT AND CLASSIFICATIONAMS5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MATERIALSTEEL COMP XM-13 OVERALL
MINIMUM TENSILE STRENGTH220000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER0.375 INCHES
SHANK UNTHREADED HOLE DIAMETER0.106 INCHES MINIMUM AND 0.111 INCHES MAXIMUM FIRST HOLE
SHOULDER DIAMETER0.4052 INCHES MINIMUM AND 0.4057 INCHES MAXIMUM FIRST SHOULDER
SHOULDER SHAPEROUND FIRST SHOULDER
SHOULDER LENGTH2.740 INCHES MINIMUM AND 2.760 INCHES MAXIMUM FIRST SHOULDER
WIDTH BETWEEN FLATS0.439 INCHES NOMINAL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENTPASSIVATE OVERALL
THREAD CLASS3A
THREAD DIRECTIONRIGHT-HAND
THREAD LENGTH0.589 INCHES MINIMUM AND 0.639 INCHES MAXIMUM
THREAD QUANTITY PER INCH24
THREAD SERIES DESIGNATORUNJF


Click here to Register for Free 30-day Trial

© 2025 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us