5306-01-206-7184 BOLT,SHOULDER Index 5305-01-206-7186 SCREW,MACHINE

National Stock Number:
5306-01-206-7185

Federal Supply Class:
5306

National Item Identification Number:
012067185

Description:
BOLT,SHOULDER

Detail:
An externally threaded fastener whose threaded portion is of one nominal diameter, No. 10 (0.190 IN.) (5 mm) or larger. It has a round unthreaded neck or shank all or part of which is of greater diameter than the threaded portion. The head is not designed to be held or driven with an inserted drivers. A locking feature may be incorporated in the design of the head or threads. For items with a thread diameter smaller than No. 10 (0.190 IN.) (5 mm) and those items with an inserted drive head, use SCREW, SHOULDER. For items which are No. 10 (0.190 IN.) (5 mm) or larger in size and are both shouldered and have an externally relieved body, use BOLT, EXTERNALLY RELIEVED BODY. Excludes THUMBSCREW.


Manufacturer Information:
74328-5D15Y56878SPS TECHNOLOGIES, LLC
74328-5D15Y80539SPS TECHNOLOGIES, LLC
AIC473D5-1506725SPS TECHNOLOGIES, LLC
BM3326-5D15Y17446HUCK INTERNATIONAL, INC
BM3326-5D15Y97928HUCK INTL INC
MB87-5D1573197HI-SHEAR CORPORATION
MB87-5D15L4528LISI AEROSPACE CANADA CORP DIV HI SHEAR HOLDINGS INC
PBF1652-5D1527624SPS TECHNOLOGIES LLC
S11-1063-5D1557928SONIC INDUSTRIES, INC.
ST3M607-5D1559563REID PRODUCTS INC.
ST3M607-5D1576301THE BOEING COMPANY
VAL23033-5D15X06710VALLEY-TODECO, INC.
VS3061-5D1592215HOWMET GLOBAL FASTENING SYSTEMS INC


Techincal Specification:
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER1.275 INCHES MINIMUM AND 1.295 INCHES MAXIMUM FIRST HOLE
EXTENDED WASHER DIAMETER0.521 INCHES MINIMUM AND 0.531 INCHES MAXIMUM
EXTENDED WASHER THICKNESS0.072 INCHES MINIMUM AND 0.092 INCHES MAXIMUM
FASTENER LENGTH1.473 INCHES MINIMUM AND 1.503 INCHES MAXIMUM
HEAD HEIGHT0.338 INCHES MINIMUM AND 0.358 INCHES MAXIMUM
HEAD STYLEDOUBLE HEXAGON W/HOLE
MATERIAL DOCUMENT AND CLASSIFICATIONAMS5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MATERIALSTEEL COMP XM-13 OVERALL
MINIMUM TENSILE STRENGTH220000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER0.312 INCHES
SHANK UNTHREADED HOLE DIAMETER0.076 INCHES MINIMUM AND 0.081 INCHES MAXIMUM FIRST HOLE
SHOULDER DIAMETER0.342 INCHES MINIMUM AND 0.343 INCHES MAXIMUM FIRST SHOULDER
SHOULDER SHAPEROUND FIRST SHOULDER
SHOULDER LENGTH0.927 INCHES MINIMUM AND 0.947 INCHES MAXIMUM FIRST SHOULDER
WIDTH BETWEEN FLATS0.376 INCHES NOMINAL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENTPASSIVATE OVERALL
THREAD CLASS3A
THREAD DIRECTIONRIGHT-HAND
THREAD LENGTH0.526 INCHES MINIMUM AND 0.576 INCHES MAXIMUM
THREAD QUANTITY PER INCH24
THREAD SERIES DESIGNATORUNJF


Click here to Register for Free 30-day Trial

© 2025 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us