5306-01-206-0093 BOLT,SHOULDER Index 5306-01-206-0095 BOLT,SHOULDER

National Stock Number:
5306-01-206-0094

Federal Supply Class:
5306

National Item Identification Number:
012060094

Description:
BOLT,SHOULDER

Detail:
An externally threaded fastener whose threaded portion is of one nominal diameter, No. 10 (0.190 IN.) (5 mm) or larger. It has a round unthreaded neck or shank all or part of which is of greater diameter than the threaded portion. The head is not designed to be held or driven with an inserted drivers. A locking feature may be incorporated in the design of the head or threads. For items with a thread diameter smaller than No. 10 (0.190 IN.) (5 mm) and those items with an inserted drive head, use SCREW, SHOULDER. For items which are No. 10 (0.190 IN.) (5 mm) or larger in size and are both shouldered and have an externally relieved body, use BOLT, EXTERNALLY RELIEVED BODY. Excludes THUMBSCREW.


Manufacturer Information:
74328-7D84Y56878SPS TECHNOLOGIES, LLC
74328-7D84Y80539SPS TECHNOLOGIES, LLC
AIC473D7-8406725SPS TECHNOLOGIES, LLC
BM3326-7D84Y17446HUCK INTERNATIONAL, INC
BM3326-7D84Y97928HUCK INTL INC
MB87-7D8473197HI-SHEAR CORPORATION
PBF1652-7D8427624SPS TECHNOLOGIES LLC
S11-1063-7D8457928SONIC INDUSTRIES, INC.
ST3M607-7D8459563REID PRODUCTS INC.
ST3M607-7D8476301THE BOEING COMPANY
VAL23033-7D84X06710VALLEY-TODECO, INC.
VS3061-7D8492215HOWMET GLOBAL FASTENING SYSTEMS INC


Techincal Specification:
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER5.716 INCHES MINIMUM AND 5.736 INCHES MAXIMUM FIRST HOLE
EXTENDED WASHER DIAMETER0.740 INCHES MINIMUM AND 0.750 INCHES MAXIMUM
EXTENDED WASHER THICKNESS0.089 INCHES MINIMUM AND 0.109 INCHES MAXIMUM
FASTENER LENGTH5.940 INCHES MINIMUM AND 5.970 INCHES MAXIMUM
HEAD HEIGHT0.425 INCHES MINIMUM AND 0.445 INCHES MAXIMUM
HEAD STYLEDOUBLE HEXAGON W/HOLE
MATERIAL DOCUMENT AND CLASSIFICATIONAMS5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MATERIALSTEEL COMP XM-13 OVERALL
MINIMUM TENSILE STRENGTH220000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER0.437 INCHES
SHANK UNTHREADED HOLE DIAMETER0.106 INCHES MINIMUM AND 0.111 INCHES MAXIMUM FIRST HOLE
SHOULDER DIAMETER0.467 INCHES MINIMUM AND 0.468 INCHES MAXIMUM FIRST SHOULDER
SHOULDER LENGTH5.240 INCHES MINIMUM AND 5.260 INCHES MAXIMUM FIRST SHOULDER
SHOULDER SHAPEROUND FIRST SHOULDER
WIDTH BETWEEN FLATS0.502 INCHES NOMINAL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENTPASSIVATE OVERALL
THREAD CLASS3A
THREAD DIRECTIONRIGHT-HAND
THREAD LENGTH0.680 INCHES MINIMUM AND 0.730 INCHES MAXIMUM
THREAD QUANTITY PER INCH20
THREAD SERIES DESIGNATORUNJF


Click here to Register for Free 30-day Trial

© 2025 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us