|
|
|
National Stock Number:
5306-01-204-3303
Federal Supply Class:
5306
National Item Identification Number:
012043303
Description:
BOLT,SHEAR
Detail:
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See BOLT, MACHINE and BOLT, CLEVIS.
|
Manufacturer Information:
| SWM10-10-20 | 73197 | HI-SHEAR CORPORATION | | SWM10-10-20 | C4293 | ALCOA FASTENING SYSTEMS FAIRCHILDFASTENERS EUROPE - VSD GMBH | | SWM10-10-20 | L4528 | LISI AEROSPACE CANADA CORP DIV HI SHEAR HOLDINGS INC |
|
Techincal Specification:
| EXTENDED WASHER DIAMETER | 16.25 MILLIMETERS MINIMUM AND 16.75 MILLIMETERS MAXIMUM | | EXTERNAL THREAD TOLERANCE CLASS | M10X1.5-4H6H | | FASTENER LENGTH | 39.25 MILLIMETERS NOMINAL | | GRIP DIAMETER | 9.9620 MILLIMETERS MINIMUM AND 9.9870 MILLIMETERS MAXIMUM | | GRIP LENGTH | 19.25 MILLIMETERS MINIMUM AND 20.00 MILLIMETERS MAXIMUM | | HEAD STYLE | SPLINE EXTENDED WASHER | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5626 MIL SPEC SINGLE MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC SINGLE MATERIAL RESPONSE OR MIL-S-5000 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL OVERALL | | NOMINAL THREAD DIAMETER | 10.0 MILLIMETERS | | SPECIFICATION/STANDARD DATA | 73197-SW-10-10-20 MANUFACTURERS STANDARD | | WIDTH BETWEEN FLATS | 16.25 MILLIMETERS MINIMUM AND 16.75 MILLIMETERS MAXIMUM | | SURFACE FINISH | 32.0 MICROINCHES OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TYPE II,CLASS 2 FED SPEC ALL TREATMENT RESPONSES OVERALL | | SURFACE TREATMENT | CADMIUM OVERALL | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 19.25 MILLIMETERS NOMINAL | | THREAD PITCH IN MILLIMETERS | 1.5 | | THREAD SERIES DESIGNATOR | ISO S |
|
|